maybe its just me but after a year of listening to it my type -s has finally gotten on my nerves so i switched to a 1g bov and im not so sure i like the sound of it. Is there a way to change the sound or am i stuck with it? will it sound any different if i face it towards the back of the fuse box verse the radiator? and from experiance what the closest we can get to an srt bov sound?
thanks joe

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

This post and this video in the same day?!? What are the chances?

http://videos.streetfire.net/video/B20096EC-0F2C-4F99-9227-80934FB999C2.htm

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

its not that i dont like it its just getting old and im looking for a different sound thats all. the greddy has been a great bov for me but i want more of a gush of air over the psssttt. but the 1g is a good gush but not powerful or loud enough of a gush imo. im only running 8psi so maybe thats it i was just wondering if there was a way to modify the sound or amplify it on a 1 g cause it has the sound im after just not the magnatude of it.

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

it'll be pretty tough to sound similar to the SRT BOV , partly because its not exactly a normal BOV. More of a diaphragm so to speak.

Have you looked into possibly the HKS RFL, its so loud its almost obnoxious, But if loud is what your looking for look at that one.

*98 eclipse rs
*2005 srt4 (screw the warranty let the modifications begin)

its the turbo xs rfl not hks.

if its not broken dont fix it!!

buy my shit...
stock eclipse, seats ,seat belts,deck!

oops ya, hks makes the super sequential. ya but really though what he said, not broke dont fix it.

I've had my BOV on my SRT4 for 2 months now, getting hard pipes and a greddy type s. The chuff gets annoying after a while.

*98 eclipse rs
*2005 srt4 (screw the warranty let the modifications begin)

Maybe look in the Turbosmart or Forge brand.

-K-

thanks for the info i just decided to stick with greddy and get the type rs and see where that gets me, hope i like it at 178.00 it would suck if i dont like it!!!

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

from what i understand and i may be wrong but the rs is pretty much the s with two extra holes drilled in the side for more a whistle noise.

we were comparing them quite a while back on a buddies, 3rd gen rx7

*98 eclipse rs
*2005 srt4 (screw the warranty let the modifications begin)

from the sound clips ive heard the rs is much more of a shoooohhhhhh verse the pstttttttttttttt that the s puts out. i wont know till i get it but if the rs sounds like the s than it will be going back with the quickness!

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

Ya I have personally heard the RS as well and its way more of a "Swooosh"

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

well thats what im after so hopefully ill like it ill post a sound clip when i get it. thanks for everyones help and input though

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

sorry to jack ur thread. but im currently piecing my kit togather and i have the hks bov that comes in the star kits, and i wanna know what sound it makes?

if its not broken dont fix it!!

buy my shit...
stock eclipse, seats ,seat belts,deck!

_______

BPU'd skittle

Got my type rs today and installed it. At first i couldnt get it to do anything i loosened the screw all the way and it was to tight still, so i did the type-s mod and took it apart and removed the bigger of the two springs.

Now if i have it half way loosened i get a nice dump kinda the sound i was after whoooooshhhhh!

funny thing is if i tighten it up most of the way i get the exact sound of the type -s ??? wtf?
that means this guy is universal and can be the type rs and the type s.

just another question though as the car is idling should you or should you not feel air gushing out of the dump hole on the bov? and than when you rev it closes up and you get no air till throttle is released and air blows off?
cause with both springs i couldnt feel any air at all during idle or blow off??

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

-MIKE-

Stroked 2.2L

I would think and again (this is just a guess) but i would not think its considered a boost leak if your bov is letting air out at idle, so long as it closes up tight and seals under full throttle it should be fine but im not pro so im with you on that one and id like to hear what others think. pop your hoods start up your engines and place your hand in front of your dump hole on your bov at idle do you feel air or not?

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

-MIKE-

Stroked 2.2L

As long as the BOV isnt open at idle, it will be fine. You have to remember, when under boost, BOTH sides of the BOV are under positive pressure, so the BOV isnt relying on it's spring pressure alone to keep it shut. You should be able to make the BOV open at least a little bit, when you just free rev the engine quickly. If it doesnt, then the spring is a bit too tight, and if it stays open when it comes back down to idle, its too loose. I have the Turob XS H34 BOV, which is a recirculating BOV, meant for a 4g63 or similiar MAF equipped turbo engine. I recirculate the bov back to the turbo air inlet, so i keep my BOV relativly loose, because leaking at idle wont matter a bit. It stays fully closed under boost, even up to 18 psi so far.(I recirc the BOV outlet because its a bit quieter, and also helps keep the turbo spooled between gear shifts) The H34 is basically a RFL, but without the "cone" on the outlet. The outlet is just like the inlet, meant for a round hose connection.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Im totally lost now??? my bov is open while it idles and you can feel air comming out it, when i rev the car it closes during rev up and opens when i stop. from what your saying the bov should be sealed tight while the car is idling and only open after a rev? if this is the case im way to loose cause like i said mine leaks during idle but my type s did the same thing. is it possible the better route to go is with the bigger spring and take out the smaller one? instead of leaving the smaller one and removing the bigger one? all i know is under boost i have no leak but at idle the bov is open about 1/4 of the way.

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

Yeah, put in the stronger/bigger spring, so it's not open at idle. When you rev it up real quick, it should open at least a little bit, then close. You really dont want the BOV open at idle, then its possible to get unfiltered air into the intake.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

i see your point and i will try the bigger spring but unfiltered air going in i dont think is going to be a problem as there is air constintly comming out the dump hole no way air is getting in. Thanks for the info though ill let you know what i come up with. Mike also let me know what you come up with as we can help each other with this issue till its fixed
joe

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

-MIKE-

Stroked 2.2L

Just bringing this back because we never got a deffinate answer as to if the BOV barely being open at idle, will harm/effect anything besides some unfiltered air possibly entering the chamber?

is it okay to run like this?

-MIKE-

Stroked 2.2L