Ok first off, I would like to say that I actually finished installing everything that I needed to and the turbo is running. But now I have a problem. The boost/vaccuum gauge reads 25 vacuum and only 2 psi of boost. I have a 14b which is internally wastegated and I just don't know where the problem is. I mean I should be running 8psi with that wastegate. This is what I I have checked so far just the boost gauge line and exhaust leaks. I don't know where I am going wrong. I mean the bov sounds off and everything. So I know I am getting boost but just not the level that I should be. Also my car hesistates when it is in second gear and I try to wot it. Not sure at this point so any suggestions would be great. Thanks

you sure that boost gauge is working right>?

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

might be a bad wastegate .check for vac leaks . also ur car hesitating may be fuel cut . what are you using for a fcd and fuel?

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

Well I have a fcd hooked up. I went the rought of making my own. I don't think that I calibrated it wrong. I mean I turned the compessor down to like 2 or 1 psi and tried to calibrate it that way. If you have a better way of setting one of those up please let me know. I am up for suggestions. I don't think it is the wastegate but it may be. I deff think that it is the fcd because I can't even reach the right boost for the wastegate to actually open. But I will try what you guys suggested and look at those two items.