#95195, "RE: safc isn't reading map. it's hooked up right too." In response to Reply # 0
Originally posted by Blizare i've went throught the settings several times now and all the pressure will read is -760mm/hg. I just double checked the map wiring and thanks to all Mike's posts I've checked everything. It must be broken but everything else works so far. It's hooked up again with just stock injectors (because of the gas prices) so I've also got an sfmu raising fp. I just don't know why it won't read the map?
Are you absolutely sure you have the "engine" side and "ECU" side of the MAP wires, wired correctly?
#95196, "RE: safc isn't reading map. it's hooked up right too." In response to Reply # 1 May-20-06 04:39 AM by Blizare
heh.
map out (yellow) is connected to the ecu side.
EDIT: I just checked again and all the wores are good to go. I never hooked up the o2 sensor one though.
The car is running fine and the afc is zeroed out right now.
No cels, but the car runs. So obviousley the map signal is getting through the afc. I don't know whats up?
I have 4 sensors displaying, rpm,tps,pressure and correction. If I make any changes to the low/high positions in will display that it's correcting +/-2 or whatever.
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle