ok how do i adjust my t25 so i dont go over 6 psi. i have it on a 97 gs 420a with stock internals and dont want to damage the motor by overboosting it. also what psi is the t25 usually at. ive heard of cutting the actuator arm in half threading it and then put a long thread nut on connecting the two pieces and loosining the thread screw to push the two pieces away to make the line longer for smaller boost. is this correct. just trien to cover everything befor i put it on on saturday. thanks
#91748, "RE: how do i adjust t25 actuator" In response to Reply # 0
Originally posted by ameclipse ok how do i adjust my t25 so i dont go over 6 psi. i have it on a 97 gs 420a with stock internals and dont want to damage the motor by overboosting it. also what psi is the t25 usually at. ive heard of cutting the actuator arm in half threading it and then put a long thread nut on connecting the two pieces and loosining the thread screw to push the two pieces away to make the line longer for smaller boost. is this correct. just trien to cover everything befor i put it on on saturday. thanks
i beleive they were set to 11psi (maybe 12) from factory/ the onlyway to adjust it is to cut it and thread it. i did that on my old T-to small. do a search, its been asked about recently and the thread to how is linked on one of the other posts.
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
Search
Printer-friendly copy
2 Users in Chat
