I blew my stock turbo elbow from my star kit, I'm looking to get a better upgraded silicone one. What is the diameter of the i/c piping on the star kit as well as the typical diameter on the outlet for most garret turbos. My turbo size is posted in my sig.
I could be wrong, but I believe it's 2" off the turbo, and either 2, or 2.25 off the i/c piping.

Can someone confirm this, I'm out of town and away from my car for another two weeks and wanted to get a new elbow ordered.

Reco's on where to order, I have a few in mind


Thanks a lot-

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Don't you have a tape measure?

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

I suppose if you read what I posted again, you would see that I'm out of town for another two weeks and I wanted the part waiting at my doorstep when I get home. But thanks for pointing out the obvious.

Do you have one that you could measure yours for me?
Thanks-

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

LOL

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

i believe mine is a 2" 90 degree but its for the 16g from hahn. depending on how much boost you are running id say give them a call and order one from them i think they were like 20 bucks? but only rated to like 15psi i think call brad at hahn he will hook you up good luck
joe

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

Thanks Joe,

I have the star kit, I'm running more than 15 lbs when I get more fuel plugged back in with a 1:1. I'm gonna order a silicone, I just couldn't remember the size, your probably right,I think it was 2" but I couldn't remember if the I/C piping for star is 2 or 2.25.

Anyone know the size of the i/c pipe for the star stage two kit?

Thanks-

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

http://www.hightempsilicone.com/

I got a 90 degree transition 2">2.5", 4 ply, great quality

_____________________________________
Scott
90' GSX, 06' Effo SSL

(parting out 95 GS)

I am pretty sure the star stage 2 is a 2" pipe. I remember measuring mine and I remember thinking it was too small...lol

Thanks a lot everyone, I really appreciate it-

I'll drink a few Coronas for you-all tonight in Mexico!

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

http://store.yahoo.com/machv/elco.html

I have 2.5" -> 2" and love it...works great

-Xavier-
95 Eclipse RS-T...lost in the frozen tundra

I use a 2.25"ID radiator hose 90* bend. Bought it at Autozone.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

*cough* *cough* ghetto *caugh* eeeegggheerrmmmm... Excuse me.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...