Ok so i have hrc turbo kit. Just yesterday i had intercooler piping made and put on along with an exhaust. Before this it was boosting at around 5-6 psi, now it only boosts 1 1/2 in first, 2 in second, 3 in third, does not ever go higher than 4 psi. Could it be a possible boost leak somewhere? Is it not gettting enough fuel? I also do not have a boost controller. Since the extra air is comming in and going out should i get a boost controller and turn it up?

This 420A is ready to hit the hay.

www.columbusdsm.com

-Josh-

Hrc stage1, starion front mount, 3" thermal exhaust, clutchmasters stage 3 clutch, 5zigen rims, eclipse front ends and 97 headlights, turbo high wing.

if you just had the intercooler piping made, i would definately check that for leaks

_____________________________________


http://www.dsmregistry.com/detail.php?carid=1133
*form follows function*

make sure you i/c couplings are all nice and tight

-MIKE-

Stroked 2.2L

I have herd of losing a psi or 2 by adding a fmic but not 3 1/2.

I had some one make the piping for me. He ran heater hoses from the intercooler to the piping and its spiral so the air isnt going straight through. I am taking it back tuesday and i will let you guys know how it turns out. Thanks for the help.

This 420A is ready to hit the hay.

www.columbusdsm.com

-Josh-

Hrc stage1, starion front mount, 3" thermal exhaust, clutchmasters stage 3 clutch, 5zigen rims, eclipse front ends and 97 headlights, turbo high wing.