I just got 2 5 pound bottles and i am just wondering if anyone has some pictures of their setup. i cant think of how i want to set it up. please send me pics or give me some ideas
Thanks

Any reason you have 2 bottles?

"Patience is a virtue, especially when dealin wit cars n chicks (usually in that order)....but at the end of the day u jus gotta love them"

i just bought the setup from madhatter he just said it was for looks i guess. why? do you have any ideas for me?

I have some ideas, I would run a similar setup to what I had. Theres alot of metal to grap for the mounting straps even with a stock trunk/floor cover. And in all reality, you will only need to access the spare if you get a flat.Unless you do a similar setup like mine and change the spare access, and you don't have to make it out of metal. I never looked for one for 5lb bottles, but they also make a billet dual bottle holder that would look pretty nice right in the center of your hatch but you will need something with a little more meat than the sock spare cover. And Also I'm not sure on if you let people in the back seat but I know theres a couple (dual) back seat bottle mounts floating around also, and would be easy access to the valves if you didn't decide to get remote openers.

http://www.murderpimp.com





2gnt T-shirts&swag
http://www.cafepress.com/mads

i will take that into consideration. Thanks. i am trying to make something, i hope it works out. I just wish i could see some pictures of some setups so i can get a good idea.
Brandon

if your gonna put it in the trunk...id think that the way madhatter had it set up would be the best. if you wanna use you stock spare tire cover...just use backing plates and you should have no problems at all. iv never seen dual holders for 5 lb'ers. i guess you COULD think about selling both bottles on ebay and just getitng a single 10 lb?

or you could do it spilner style with it in the back seats...i dunno

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

i guess i could do that but i would really like to see some pictures. I couldnt really see it in the pics from madhatter. where in the back seat do you put them?

I'll try to find some more pics later, but it gives you the idea. Put the brakets on and tuck them into each corner.

http://www.murderpimp.com





2gnt T-shirts&swag
http://www.cafepress.com/mads

so it looks like it is split so you still have access to your spare tire correct? Also did you just drill right through the spare tire hole for the blow down tube

yea my center piece still allows access to the spare, and yes kind of put the blowdown tube on the bottle and get your top hole marked and cut, then lower it down through. I used my girls lipstick on the end of the blowdown tube to mark the general exit location in the well, then just cut out the hole. Though I had to unhook the tube on the right to lift the hatch for spare access (no biggie though).

http://www.murderpimp.com





2gnt T-shirts&swag
http://www.cafepress.com/mads

cool thanks. let me know if u have any more pictures. i have a good idea on how to do it now.
Thanks