which of these are you guys using? im installing tomorrow so i need to go ahead and get them. OIL FILTER? FUEL FILTER? OIL PAN GASKET? (i may not replace it yet) EXHAUST GASKET? (factory chrysler mentioned in teh hahn manual, or is the accell copper gasket better?) http://www.geocities.com/blue2gnt --------------------------------------------------------------- VANILLA RICE
#8567, "RE: OIL/FUEL filters & OIL PAN/EX.MANIFOLD gaskets?" In response to Reply # 0
>OIL FILTER? I use the Purolater PureOne Oil filter with Mobil 1 Synthetic.
>FUEL FILTER? I just bought a NAPA gold filter. I'm sure there are better high flow ones out there.
>OIL PAN GASKET? (i may not >replace it yet)
I didn't replace mine, but was sure to use some silicone sealant as per the instructions.
>EXHAUST GASKET? (factory chrysler mentioned in >teh hahn manual, or is >the accell copper gasket better?)
I just in fact replaced my stocker. The stocker was a multilayer steel gasket. It looked great when I installed it, but you should see it now after it's been replaced. (OMG) It looks like some of the rubble that came out of the WTC attack. I'll post a picture later.
Now, per the posting from the dude under the "dealers" section here, I bought a copper exhaust manifold gasket. Already, I can tell I spool noticeably quicker and have no leaks at the head joint. The installer (I didn't feel like doing it) was impressed with the product.
#8569, "Pics of my Old Exhaust Manifold Gasket...." In response to Reply # 2
Take what of it you will....(but it sure looks damn nasty to me...)
(I think the last picture really tells the tale. When I first removed this gasket after 23k miles of N/A conditions, it was still shiney and straight. This is what's happened to it after almost 16k miles turbo'ed)
Boost, and its accompanying heat, is a whole new ballgame as compared to being naturally aspirated...thats for sure!
#8570, "RE: Pics of my Old Exhaust Manifold Gasket...." In response to Reply # 3
GAWD your gasket if FUCKED. Mine looked nothing like that. Hell mine was still shinny silver color and looked like it would seal. I wouldn't put that back in either!
#8574, "RE: OIL/FUEL filters & OIL PAN/EX.MANIFOLD gaskets?" In response to Reply # 7
I just piggy backed 2 napa factory replacements together... I think thats what Bill uses on the RS too.. Atleast last time i asked him about it. -- Brad Rickard 98 GS HRC Stage V (nuff said)
#8575, "RE: OIL/FUEL filters & OIL PAN/EX.MANIFOLD gaskets?" In response to Reply # 8
I have been doing gaskets for YEARS (More then some of you are old ), and I have found that FELPRO is the best. I have done 50 or more headgasket jobs and NEVER have had a comeback because of a bad/malfunctioning gasket. FELPRO is the best in ALL gaskets.
#8576, "RE: OIL/FUEL filters & OIL PAN/EX.MANIFOLD gaskets?" In response to Reply # 9
yeah, thats what the napa gaskets i got were. Felpro, a lot cheaper than copper gaskets, and they hold up for stage V's, as long as you have a straight manifold, hehe. Just double them up if you want, I do and I have a real tight seal, -- Brad Rickard 98 GS HRC Stage V (nuff said)
Search
Printer-friendly copy
5 Users in Chat
