I removed my erg system when I boosted my engine, but it throws the check engine light. I read on here that could put a resistor (10 watt 100 Ohm) in the plug to get it to stop. The plug only has two wires going to it so I stuck it in both holes and I still had the code. Did I do something wrong? Help would be cool, thanks

Ryan Siefring
Located near Dayton OH, zip 45356
Student at the University of Dayton.

search buddy.

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=23&topic_id=627&mesg_id=627&listing_type=search

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

thanks, that was intresting, but it didn't really help me or answer my question. i will search.

Ryan Siefring
Located near Dayton OH, zip 45356
Student at the University of Dayton.

I wouldn't worry about the CEL unless you have to pass an emission test. In that case if worst comes to worst just reinstall the EGR valve and reset your ECU, Take the test, drive home and yank it off again

I'm a bit worried that you said the 100ohm 10watt resistor didn't work. What year is your 2gnt?

he is a 95. You try just taking the egr pipe of itself and make block offs for the manfold and then on the main egr peice itself? Thats what i did on my 95 and it worked.

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

Shit if all your worried about is passing emissions, pull your gauge cluster and pull the lightbulb

works like a charm.

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

i think i will just pull the bulb then. it was just easier to put in the resistor. you just stick the wires in each pin hole right?

thanks, for the help.

ps i did read up on all this stuff and did a search, i was just confused why mine still didn't fix it. maybe i'm getting the insuficeant flow cell everytime.

Ryan Siefring
Located near Dayton OH, zip 45356
Student at the University of Dayton.

Did you clear the code after you kept trying?? I know when my ex's car had a dirty sensor that threw a code and after i cleaned it the code wouldn't go away, i left the battery disconected and the car run enough to figure things out on its own. I actually had to throw my OBD-2 software at it and clear the code through my laptop

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

__________________________________________
~Chris

forums.kaptainmyke.com/index.php?&act=garage&CODE=12&CID=8
- AGP CAI
- AGP EVM
- MOPAR Stage 1 ECU
- 500cc Injectors

And he wonders why he couldn't make her happy...and someone obviously hasnt moved on. lol

i'm not concened about emissions, i don't have a cat, but the light doesn't come on untill after i drive it for 30 seconds some times. i will try clearing it thou, worth a shot.

Ryan Siefring
Located near Dayton OH, zip 45356
Student at the University of Dayton.