Could I use this intercooler piping set for the t3/t4 turbo (one with star kit)? Thanks...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=38634&item=7936186412&rd=1

with some modding and fabbing, yes.

intricatelines.com/ -graphics and vinyls

"Tell them of us and say,
For their tomorrow,
We gave our today."
-- The Kohima Epitaph

might wanna make sure it's for a 420a eclipse/talon. hahn DOES make stuff for 4g63 engines btw. it might be a FMIC kit for a GST/GSX.

-marc

Looks like it could be the piping set for the FMIC upgrade to a stage 2 420A kit... The lower pipe in the pic looks like it could take the 90* coupler on the left side, then swing down to the IC inlet... but it could very well be '63 stuff too. Not real familiar with the HRC piping personally, i've never owned or used it.

I'd ask the seller before bidding.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/