The turbo i have is A T3. I have the manifold and dp. The intake portion of the Turbo is on the left side. I know now it might be more difficult. I want to run a side mount. Is this setup possible since my turbo is facing the opposite direction? Does anyone else have the same setup?

Can you not just mount it upside down?


1996 Eclipse RS / 5-Speed / Aerogear Body / Coated in Magnetic Red Metallic rev.2 / T3 Turbo Intercooled @ 8 psi / http://www.team2nr.com
Mark Galyan - Indianapolis, Indiana

no. The inlet has to be as close to pointing up as possible and the oil outlet pointing down. The way it goes back to the oil pan is by gravity .

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

sounds like you have a turbo from an old Chrysler 2.2 turbo engine
I hope your manifold and downpipe are for a 420a

Alain

one of the 2.4 true pionners

The downpipe and manifold i got should fit. Does anyone have a setup where their turbo is facing left?

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

I believe there is one person on this board who has the inlet facing the passanger's side, this should actually make it easier to run an FMIC with this setup, because the inlet and outlet wouldn't have to be on the same side.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Solareclipse was made like this

Alain

one of the 2.4 true pionners