ok. Can someone please explain to me exactly how an 8 injector setup works? 1 pound of boost - ? wtf? lol What am I going to see when im at WOT as far as fuel pressure goes. I have the fuel sending unit on the rail which houses the stock injectors.

I have the idle set to 55psi. I noticed the HRC instructions didn't even mention where to set the idle fuel pressure. Its 55psi ok? Anyway.. Car does sound like it idles better than before.

I was surprised to find no fuel leaks!! WOOHOO!

Dyno time is Wednesday at 6pm. When I get back, I WILL post a dyno sheet for at least 24lbs of boost. Not sure if I can get race gas in time for higher boost.

Ill probably have more questions.

Oh and BTW, I didn't shave down my valve cover like Super20g did and the new plate doesn't seem to leak. Ill find out more under boost.

Thanx in advance.

To my knoweledge you run stock pressure 48-50 psi with a 1:1 rising reg. Good luck wed

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

cool thanx man.

oh one thing i noticed is that the car seems to sputter a little bit. while it was sitting, i reved it a little, then a lot and it seemd to sputter for just a split second. im sure its nothing.. hoepfully.. ecu was reset so.. maybe its wiggen out again.

here is another question.

when i did rev it.. the fuel pressure dropped to about 46psi from 55psi. any thoughts about this? should have i set the base fuel pressure without vacuum supplied to the 1:1 reg or with vacuum?

thanx
James

The base (or static) fuel pressure is set by removing the vac line to to regulator. The idle fuel pressure is your fuel pressure at idle (with vac line connected).

It seems to me like your static fuel pressure is set pretty high, which is probably why you're sputtering. I run 45 PSI static with an Aeromotive 1:1 regulator and Accel DFI. The original DFI instructions say to set the static to 40 PSI so I'm assuming Bill used a similar fuel pressure for the PortFuel system (yes, I run a higher fuel pressure on purpose).

Since you have a wideband, why don't you adjust your fuel pressure until you see respectable idle AFR? What is your wideband showing at idle anyways?

one of you going to do a writeup on the portfueler? MrSlick, hopefully, is doing a writeup on the MegaSquirt, which i look forward to reading.

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

i believe 43.5 is exactly what you want it at for idle. then it will be 67.5 under full boost

Klein567 - Ya i heard about that ticket you and Sean got.
Clint485 - Stupid chick cop...worst part was she looked like a dude.
Klein567- Thats becuase all hot cops are strippers

Bill's 'website' says "PortFueler idles @ 50 PSI, not a low 20 PSI or less where fuel injectors just can’t spray well."

But that is not what I was told, so I guess your fine dood, just look at the wideband I guess

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

james, on your receipt, did they charge you seperately for the fuel fittings, line? I just spoke to craig, and he was like, they didnt add that line item on the ticket... you need to call sales and pay them some more $$, lol. Ehh, what part of 'give me everything i need to get this up and running ASAP' do they not understand?

I suppose it depends on how much you paid. I didn't even ask for a receipt. When I talked to Bill I just asked for everything and I got everything in 2 packages. I bought the DP at the same time. The total was about 1300 bux.

James

hmm, mine was a grand, and the fuel stuff isnt included it looks like, or the software. I found the fuel injectors 30 bucks cheaper online, so i might just return hahn's set get a credit, and apply the extra 30 towards the damn fuel fittings/line

Did you get install instructions? other than for the AIC unit.

yesh i got the software, fuel fittings, and instructions for around a grand. im not sure what the total was though. ill call and get a receipt. ill post when i have it.

James

H FI-5015 PortFueler Mounting System, 420A Talon/Eclipse
H FI-5060 PortFueler Control Module
H FI-5070 PortFueler Calibration, Stage V
H FI-5115 Stage IV and V Fuel Hose Kit, Late Talon/Eclipse

I'm guessing you're missing H FI-5115. I'm sure there are other PNs related to the port fueler. I only know of those.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

Im sure I just shot myself in the foot..

Talked to melissa at hrc. Apparently I was only charged $291 for the entire portfuler system and the 3" downpipe and they didn't charge me for the new AIc I had to order on friday.

Thanks for the info guys, I placed an order for the fuel kit.. Sorry to hijack the thread, I cant believe those fuckers did not tell me that was seperate, I can't help but be nice to melissa cause she sounds so nice, but damn, i'd like to ring somones neck. The whole experience has been horrible customer service wise...

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I run around 43 psi at idle, with the vac line connected to the 1:1 Also, Doug is right about the pressure, dont assume if you run 43 psi at idle and you run 10 psi boost, that your pressure will be 53 psi. Whatever your static pressure is(0 psi), then add approx 1 psi fuel pressure to 1 psi boost.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

i got mine yesterday...the only things i didn't get were software, and fuel lines...gonna call tomorrow to see if they just forgot em or i didn't pay for em...i paid enough, i should have gotten them..

-Mike

you guys are running different boost settings than hahn's 27lbs setting. I have understood that the system works off of boost pressure not rpms like the afc so if all i wanted to run is like 20lbs or so on pump gas i would be fine? Would the fuel curves be correct enough for that? Ive done several searches read lost of post went to several links and on gs turbo as well and i just want to make sure my understanding is correct?

i still cant believe you guys paid 1000 bucks for a 8 inj setup. aw man this cracks me up.

you could have had a dfi gen7 for a couple hundred more.

It's all because of the great PR/Marketing job that Bill is able to do...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Originally posted by MrSlick
It's all because of the great PR/Marketing job that Bill is able to do...

____________________________________________________
four nails four corners four riders and four horses