Hello everyone, just thought i'd share a few pics of my turbo install...after many cut fingers and cuss words here are just a few of the pics, i am in the process of welding the manifold and piping, also anyone in the south florida area with a 1g BOV please PM asap. The intercooler is from a turbo volvo approx 80$ fits pretty good but hanges down quite low, 18" rims help though. I went with a 14b turbo for 20$ that i rebuilt myself and welded the cracked exhaust housing very poorly with an arc welder. Oil cooler from a toyota camry which should help to keep the turbo running cool. Since i am a cheap college kid i used all 1/4" rubber fuel tubbing for oil/water with 1/4 tube connecters with clamps and some jb weld, i like to keep it simple cheap and of course ghetto but what can you say for putting a turbo on for less than 500$? Also is the 14b wastegate set at 10psi on default?

that intercooler is not bad. Reminds me of hadesomegas old runs.

Hope thats some really high temp JB weld.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

I hope you arent lowered. I scrape my HRC front mount and it's not even below my front bumper.

John 96 GS

holy hi res picture.

Steve-o
Top secret.

Originally posted by FlyinEsi
I guess I'll just have to live with a 500+ hp AWD 4-banger.

BTW man you will need to find a way to make the WG actuator open earlier than stock....if you dont have built pistons/rods.....

vote for your choice of body style for Bluie!! http://www.cardomain.com/id/bluemooneclipse

I would keep an eye on that JB weld, if it gets too hot it starts just burning off, just keep an eye on it.

Work in progress
98 GS t3/t04e, hrc Sidemount, tial 38mm, HKS ssq bov, clutchmaster stage 4, wiseco pistons, Eagle rods, Apexi TT, HKS EVC II, Phantom grip lsd, 3in turbo back, Eibach pro-kit, Defi D-gauge EGT,boost, autometer fuel pressure
8-inj setup in the works, HKS AIC III and 450cc injectors

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

man if i were you, i'd remove that JB weld... with all the vibrations and heat that turbo makes, it won't last for shit. and you wouldn't want that oil return line to be leaking. you're better off with just teflon paste or high temp silicone gasket maker on them threads. another thing that IC is definitely going to scrape, my IC is taller than yours and it's barely touching the floor, i'm sure yours will as well, you have to bring it up some. look at mine for example this is 13.5"H, 15.5"L 2.5D:

Originally posted by DarKReaLity
man if i were you, i'd remove that JB weld... with all the vibrations and heat that turbo makes, it won't last for shit. and you wouldn't want that oil return line to be leaking. you're better off with just teflon paste or high temp silicone gasket maker on them threads. another thing that IC is definitely going to scrape, my IC is taller than yours and it's barely touching the floor, i'm sure yours will as well, you have to bring it up some. look at mine for example this is 13.5"H, 15.5"L 2.5D:

www.gregsorrells.com

http://ubanimator.com>

IMO that jb weld will last you about... oh.... 15 minutes... when the turbo gets hot... you will be rebuilding it again..

"one team, one love, all skills" - REVoluzion

Originally posted by DarKReaLity
man if i were you, i'd remove that JB weld... with all the vibrations and heat that turbo makes, it won't last for shit. and you wouldn't want that oil return line to be leaking. you're better off with just teflon paste or high temp silicone gasket maker on them threads. another thing that IC is definitely going to scrape, my IC is taller than yours and it's barely touching the floor, i'm sure yours will as well, you have to bring it up some. look at mine for example this is 13.5"H, 15.5"L 2.5D:

FS: 2.5" Test Pipe 25 shipped

where in sw florida are you?

i thought jbweld could only take like 700 degrees

though i've heard of people holding cracked blocks together with the stuff so... what do I know...

FS: 2.5" Test Pipe 25 shipped

i've heard of that too. but i tried to repair exhaust leak with it... hehe, lets just say it was a good effort.

"one team, one love, all skills" - REVoluzion

Ft. lauderdale, the JB weld holds up to 500F whith a tensile strength of 3200psi (google jb weld) with a turbo water/oil cooled it should not run that hot near the core. Anyways i had everything bolted on and guess what? I connect the radiator hose and the plastic connecter on the radiator cracks out...err change your radiator every ten years. I'll update you with pics, anyone have a missing link fs?

inch and a half from 1600* fahrenheit, and you dont think that region will break 500 degrees?

just go junkyarding and get the proper oil feed barb/oil drain flange!!!

FS: 2.5" Test Pipe 25 shipped

that fmic my friend, is from a diseal truck.

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

yeah it's big but you know what!? it's the best upgrade i ever did, it gave me a tremendous difference from the STAR IC to this NPR IC. just by my EGT readings i can read the difference, so far, 18psi daily full boost and 1450*F. so it's real efficient. my only problem right now is my slipping clutch that i'm trying to make free time to install, but looks like 25psi coming soon. oh BTW i no longer have that front bumper i was just testing it out but i didn't like it. now i have the 97+ bumper. either way you can see it's real tall but i managed to make it fit with no problems.

just IMO that cartoon... sucks.. not trying to flame, but that dude looks like he's gettin it in the A**

"one team, one love, all skills" - REVoluzion

www.gregsorrells.com

http://ubanimator.com>

That's great and all that your EGTs are lower, I mean, really swell. But what about IAT, pressure drop, lag? Also, do you really think the top of it is being used at all? Go for a hard run and feel the bottom and top of your IC.

Lets just say this... I'm over 100whp and soon to cross 200whp. Thanx 2GNT! Now if I could only learn to prove it.

FS: 2.5" Test Pipe 25 shipped

well turbo response had improved,it spools a little quicker than it used to, just because it's big doesn't mean i'm gonna get more lag or great pressure drop. it depends on your mods,how much you boost you're running, what type of turbo you have, how efficient the IC is and also the way you route your IC piping. i have routed in a way that it doesn't increase pressure drop. i try to avoid many 90* bends on the hot side but i kept the STAR cold side piping. i did do a hard boosted run check and i was amazed of how well it cools down. the hot side is HOT and the cold side is slightly warm so it's doing it's job. it helps greatly mainly 'cause there's more cooling area on that core than most IC's i've seen that are like 7~9" high and 20" wide. it also has 21 extrude tube channels which helps cool the air at a greater volume. i have a t3/t4e so it's prefect for me. this is the IC i will ever need.

do you want some like... better hosting for your little cartoon there so you dont have "cardomain" stamped on it? lol

FS: 2.5" Test Pipe 25 shipped

that jbweld will last about 5 min. Your turbo will be around 1200degrees. I had a shop that was checking out some things clock it with a gun, when I pulled in it was 1200, and didnt drop very fast.

Listen to darkreality, hes been around longer then your mom. what he says is golden.

Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high