ok, i now have all the current parts for a turbo setup, i just need to know if I have everything to run at 7psi Also i have a 95 Esi btw so i dont think i need the fuel lines, since mine already has a fuel return line:
Custom made manifold t-25 flange t-25 turbo 1g bov starion intercooler cartec fmu (rising rate fuel pressure regulator) 1:1 fuel pressure regulator oil lines vacuum lines mandrel bent intercooler pipes, connectors, clamps 190 walbro fuel pump oil pan with oil tap in it boost gauge autometer ultra lite all steel braided fuel lines with A/N fittings manual boost controller 2 ½ down pipe (to cat) with wastage dump tube o2 sensor welded on down pipe fuel tank lid with return line hole in it missing link
#73523, "RE: custom turbo setup... please check" In response to Reply # 0
i dunno about the talon, but with the eclipse, you don't need the missing link. You will not need the 1:1 regulator either(unless your trying to stabalize the cartech). You should probly get the walbro 255LHP also. I used to have the same exact setup minus the above mentioned. You won't believe how fast that t25 spools. Great for autox. I have since upgraded to the 14B and am loving it much more than the T25. O yea don't forget you will have to rotate (clock) your compressor housing and center section. Just remember to have the oil return DOWN as you dont want to blow your turbo's seals. Sounds like you have most everything good luck man.
#73537, "RE: custom turbo setup... please check" In response to Reply # 1
I would also recommend an EGT gauge and Fuel PSI gauge and a digital numeric A/F meter. Walbro 255lph fuel pump. I think you should also plan for more downtime than you expect to do this. I don't think you will ever have all the parts you need to do this before you start.
#73548, "RE: custom turbo setup... please check" In response to Reply # 4
Originally posted by RxR_Eclipse that is what i thougt, just did not want to give any bad info out.
On the other hand I've seen 95 owners still feel the need to protect the MAP sensor from physically seeing boost so they install the ML anyway. Not sure on that one though. Dino would probably know more about that.
Search
Printer-friendly copy
1 User in Chat
good luck man.
