#73316, "RE: nitrous not spraying..." In response to Reply # 2
COuld be a dying solinoid, or one with a weak electrical connection.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#73317, "RE: nitrous not spraying..." In response to Reply # 3
or if you dont close it between uses (not in one night, but over days) the nitrous will leak out slowly.
do you have a heater, a pressure gauge, remote opener?
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#73318, "RE: nitrous not spraying..." In response to Reply # 4
Ok close the bottle activate the switch and then flip the wot switch in the engine bay, listen for a click from your solenoids. Dont make it click too much because you could potentialy fry your solenoids. Just do it a couple of times to see if they are opening. If there is no click check your wires and your grounds, You probly wired them backwards.
#73335, "RE: nitrous not spraying..." In response to Reply # 0 Jun-30-04 09:50 PM by ECLiPSE56
ya.. bottle filled pressure @ 800, opened, armed, and everything gtg. i've sprayed before.. i hear a click only on the fuel solenoid and not the nitrous.. kit's been sittin in my garage for about a year untouched.. so think it's the nitrous solenoid? think it's time for a new one? couldn't be anything else huh?
Allan allan@sablan.org --=-=-=-=----------representin NoRCALi/BaY ArEa since '97-----=-=-=-=------
#73348, "RE: nitrous not spraying..." In response to Reply # 7
Take the solenoid apart and clean it. When I was running nitrous I was purging and had the valve stick open. So I turned off the bottle and cleaned the solenoid. Worked great after that.
#73369, "not the solenoid" In response to Reply # 8
Ok.. that clickin noise that i heard was not from the fuel solenoid but from the relay itself.. i tested each of the solenoids individually straight onto a 12+ bypassin the relay and it works. Seems as tho it's not gettin power to open the solenoids.. hmmm..ima go pick up a volt meter.. unless u clever guys kno of another way to check for continuity on a wire w/o a meter?
i can't seem to find the problem!? all my wiring is cool.. there's a current in every wire.. how come my solenoids aren't gettin power?? Shit's armed, micro switch activated, yet still not gettin juice to the solenoids to open.. getting really peeved here.. think it could be the power relay.. cuz that's the only thing i could think of.. any other ideaS?
Allan allan@sablan.org --=-=-=-=----------representin NoRCALi/BaY ArEa since '97-----=-=-=-=------
Search
Printer-friendly copy
1 User in Chat
