#70750, "Oil spraying in engine bay and white smoke"
Just recently I've noticed alot of oil spraying into the engine bay. The catch can still fills up a bit but it seems there is excess oil spraying in the engine bay. There is oil spraying on my hood (the battery side) and it seems it drips from my top hood latch when I open it. I have no clue where it's coming from. And sometimes when I got WOT and boost for a sec then let off I shoot a cloud of white smoke out. I did a compression test and it shows 180-181-179-180. So its perfect compression. Coolant is fine and the oil is spraying out and I seem to put 1/4th -1/2 a quart in every few days. Please help!
#70753, "RE: Oil spraying in engine bay and white smoke" In response to Reply # 2
See I really can't tell where it's coming from. I'm bout to go take off the intercooler piping and look to see if there is any oil in them. And the valve cover has no real deposits of oil around it so I wouldn't think it would be that but I don't know.
#72484, "RE: Oil spraying in engine bay and white smoke" In response to Reply # 3
Check and see if it's coming from the Valve Cover like Nate said. I had the same problem once. Or go get the black light dye and test it that way. That stuff rocks.
____________________________________________________ four nails four corners four riders and four horses
#72485, "RE: Oil spraying in engine bay and white smoke" In response to Reply # 4
holy post from last month captain...
he has worse problems than oil spray at the moment considering his block has a window now and the rod and piston are in 100 pieces... but im sure he appreciated the help...
_______________________________________ The end of the internet begins here... www.broke-off.com
#72488, "RE: Oil spraying in engine bay and white smoke" In response to Reply # 5
It was happened to me 1 year ago, it was a Camshaft sensor seal. First, It's really Hard to find before, because the oil is spray all over valve cover battery side, but when I clean my engine bay and try to WOT, than I can see more clearly the oil is leaks from Camshaft sensor seal. After I change it, now My engine bay is clean.
#72533, "RE: Oil spraying in engine bay and white smoke" In response to Reply # 6
Hehe, thanks for the help but yah he is right I have more problems then an oil leak now . Like he said I have a whole in the block without a rod in #1 cyclinder and lots of little chunks of rod in my oil pan. Going to get it rebuilt soon hoping for the best!
Search
Printer-friendly copy
2 Users in Chat
. Like he said I have a whole in the block without a rod in #1 cyclinder and lots of little chunks of rod in my oil pan. Going to get it rebuilt soon hoping for the best!