ok, i pulled off the oil pressure switch, put in the adapter, set the tee pointing straight up, and now how do i get the adapter and 90' fitting on the top of that tee??? i cant get to it to tighten it... anyone have any opinions??
thanks for the help!! i'm gettin this thing running by next week so help me god, i would have it done but... work sucks!
#69575, "RE: Oil Feed Install question... i'm stuck..." In response to Reply # 0 Apr-21-04 06:48 PM by jsupetran
Originally posted by Blitzsuperstar ok, i pulled off the oil pressure switch, put in the adapter, set the tee pointing straight up, and now how do i get the adapter and 90' fitting on the top of that tee??? i cant get to it to tighten it... anyone have any opinions?? thanks for the help!! i'm gettin this thing running by next week so help me god, i would have it done but... work sucks!
Tightening that SS fitting on the tee is a BITCH. There's no way around it; you just gotta get your hands in between the block and the firewall and keep tightening with a small wrench.
I think you have the sequence wrong. The sequence for the oil feedline (working off of my memory).
block> tee adapter> stock oil pressure sensor> on other part of the tee, an adapter that reduces the inlet for the feedline > ss oil feedline on that reducer> then 90 degree elbow thingy > that goes onto the top of the turbo.
edit: this pertains to HRC kits btw. If your a star owner, disregard this post.
-------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#69576, "RE: Oil Feed Install question... i'm stuck..." In response to Reply # 0
Originally posted by Blitzsuperstar ok, i pulled off the oil pressure switch, put in the adapter, set the tee pointing straight up, and now how do i get the adapter and 90' fitting on the top of that tee??? i cant get to it to tighten it... anyone have any opinions?? thanks for the help!! i'm gettin this thing running by next week so help me god, i would have it done but... work sucks!
What J said but there is no 90 degree fitting that goes into the T. Just the brass adapter that goes from T to SS line.
#69587, "RE: Oil Feed Install question... i'm stuck..." In response to Reply # 2
I ended up buying a 45* fitting to give me a better angle to attach the oil feed line for the turbo. The one that came with the kit just seemed to close to the back of the block itself and the oil feed line wouldn't thread straight on.
You are not your job. You're not how much money you have in the bank. You're not the car you drive. You're not the contents of your wallet. You're not your fu**ing post count.
#69591, "RE: Oil Feed Install question... i'm stuck..." In response to Reply # 3
cool well, the things i got with the kit were (HRC kit)
adapter and 90' fitting for the turbo.. installed..
Oil sensor adaptor, a like 2/3 to 1/4 adaptor on top (those numbers are just a rough guess, i dont feel like measuring), then a 90' fitting on top of that that is supposed to point left to easier install the feed line.
but thanks, i guess i'll just have to take my sweet little time trying to get that sh*t on. '
Search
Printer-friendly copy
1 User in Chat
Just the brass adapter that goes from T to SS line.