Ok guys...do i have enough? 255lph,safc2,440cc injectors and the hahn FMU...not the sfmu..is there a difference? Appreciate any input..also trying to hit like 15psi
#69429, "RE: fuel setup....good?" In response to Reply # 1 Apr-19-04 06:08 PM by techboy
That will work for a start. Your probably going to eventually going to want to replace the Hahn FMU with an aftermarket - most people use the Vortech SFMU. Ahh, you have the Accel in-line right? I know only a of like 2 people on this board that are running sucessfully without it with a Walbro 255. The nice thing about the Walbro and Accel in tandum is it makes the Accel quiet I'm told. I don't have it a Walbro, so I'm not positive.
#69432, "RE: fuel setup....good?" In response to Reply # 2 Apr-19-04 07:10 PM by xtrickedeclipsex
Originally posted by techboy That will work for a start. Your probably going to eventually going to want to replace the Hahn FMU with an aftermarket - most people use the Vortech SFMU. Ahh, you have the Accel in-line right? I know only a of like 2 people on this board that are running sucessfully without it with a Walbro 255. The nice thing about the Walbro and Accel in tandum is it makes the Accel quiet I'm told. I don't have it a Walbro, so I'm not positive.
yea, they work good together , but you dont have to have both
#69444, "RE: fuel setup....good?" In response to Reply # 3
Your absolutely right ^^^ you don't have to have both the Walbro and the Accel, but you AT LEAST have to have the Accel and the stock in-tank or your going to have problems. Thanks for clarifing.
Search
Printer-friendly copy
0 Users in Chat
