#68918, "Oil feed line for HRC kit ( small rant included )"
I need to get an oil feed line for my HRC kit. I called HRC toget a replacement on the 30th. Said that it would be sent out. Waited for it, waited for it....nothing.
Call them and they are like oh its on backorder ( story of my life ). I was told that they would get some on the 12th. So I call them to check the status yesterday. Gonna be on backorder for "at least another week"
Does anyone know where I can get one other than HRC? What size are the fittings/line?
#68920, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 0
just get a 4an ss feed line. I forget the adapter sizes i think 3/8th. But if you search for the sizes you can find them. Make it yourself if there gonna have it on "backorder" then why buy from them.
#68925, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 2 Apr-13-04 08:43 AM by Avenger
Hey Jon,
This is what you'll need ... if you already have the feed line.
3/8" NPT Male Coupler (threads - hex nut center section - threads) 3/8" NPT Female Tee (takes 3/8" Male threads in threaded holes) 3/8" NPT Male to -4AN Male fitting
So what you do is (and remember to use teflon tape or paste on all NPT threads)
1. The 3/8" NPT Male Coupler goes in to 1 of the holes the 3/8" NPT Female Tee. Tighten it down. 2. Screw the stock Oil Sender unit into the opposite side of the tee that the coupler is in. 3. Screw the 3/8"NPT to -4AN fitting into the top of the tee. 4. Screw the whole assembly into the back of the block where the stock oil sender would be. The other half of the male couple will be screwed into the block. 5. Attach feed line.
If you have another oil pressure sender you'll need to find another fitting so that you have a place to put that sender on. I can take pics of my setup tonight when I get home if you'd like.
#68931, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 4
Owned by not reading carefully ... DOH! Jon, try calling any place that specializes in turbos. FP, roadrace, etc. They will probably have an oil feed line. Just tell them -4AN on both ends.
#68944, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 6
ya, hrc sucks for that. they said they would overnight me one. and i called two days later, and they didn ship it. so i went to the local machine shop, got 2 ss braided brake lines that have 90* fittings on the end of them, and added a 4an to 4 an male/male adapter to the middle. looks better then the hrc line, and fits just as good.
#68992, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 10
I would also like to know this one, Im stuck with a 14b that I cna't use cause I don't have the banjo fitting. I have the one that came off of the damn 1g eclipse it was sourced from but of course that will not work.....
#69054, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 0
Originally posted by 95greenhrcgs I need to get an oil feed line for my HRC kit. I called HRC toget a replacement on the 30th. Said that it would be sent out. Waited for it, waited for it....nothing. Call them and they are like oh its on backorder ( story of my life ). I was told that they would get some on the 12th. So I call them to check the status yesterday. Gonna be on backorder for "at least another week" Does anyone know where I can get one other than HRC? What size are the fittings/line? Any help you can throw my way would be great. Thanks Jon
It shipped out today.You should see it within a few days.Unfortunately we cant control the companies we purchase items from.If they have it backordered there isnt much we can do.
98 Neon R/T 12.25@122 Street tires.ful exhaust,full interior Hahn Racecraft Stage4.5 System
#69065, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 13
Originally posted by Sgt Craig
Originally posted by 95greenhrcgs I need to get an oil feed line for my HRC kit. I called HRC toget a replacement on the 30th. Said that it would be sent out. Waited for it, waited for it....nothing. Call them and they are like oh its on backorder ( story of my life ). I was told that they would get some on the 12th. So I call them to check the status yesterday. Gonna be on backorder for "at least another week" Does anyone know where I can get one other than HRC? What size are the fittings/line? Any help you can throw my way would be great. Thanks Jon
It shipped out today.You should see it within a few days.Unfortunately we cant control the companies we purchase items from.If they have it backordered there isnt much we can do.
Cool, thanks. In know that its not your fault, its the nature of business sometimes. I was just trying to get my car back on the road somehow while I was waiting for the real deal to come in.
#69064, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 0
which switch on the back of the block is actually the oil pressure switch that the oil feed line tees into? if you are looking from the bottom of the car up, is the one near the intake manifold on the left side? i noticed there are like 3 diff switches down there and do not want to tee into the wrong one? which one do i use? anyone have any pics of the one i need to tee into? is it the one with the orange or green (dont remember what color it is) plastic piece that is connected to 1 wire that plugs into the switch? thanks guys. help out a newbe!
#69115, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 16
Originally posted by eclipse982nrRST which switch on the back of the block is actually the oil pressure switch that the oil feed line tees into? if you are looking from the bottom of the car up, is the one near the intake manifold on the left side? i noticed there are like 3 diff switches down there and do not want to tee into the wrong one? which one do i use? anyone have any pics of the one i need to tee into? is it the one with the orange or green (dont remember what color it is) plastic piece that is connected to 1 wire that plugs into the switch? thanks guys. help out a newbe!
It's on the back side of the motor closest to the drivers side, next to the trans. It's the only threaded oil line. The crank sensor is held in with a 10mm bolt, and the hole the sensor sits in is not threaded. The other sensor is a knock sensor and it just threads into the block, it does not go inside to the crank case.
____________________________________________________ four nails four corners four riders and four horses
#69136, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 20
can someone PLEEEASE snap a quick pic of the oil press switch pleeeeease? also, if i have the right one, mine is junk i think, anyone know where i could find one online to buy? thanks, please help!
#69496, "RE: Oil feed line for HRC kit ( small rant included )" In response to Reply # 21
http://www.turbosupply.shoppingcartsplus.com/page/page/972133.htm This guy has good prices on oil feed lines if you need one. As far as the stock oil pressure switch...you really don't need it. All it does is work the idiot light. My idiot light came on about a half second before I spun a bearing which is pretty useless in my opinion. You'd be better off getting an actual oil pressure gauge.
Lets just say this... I'm over 100whp and soon to cross 200whp. Thanx 2GNT! Now if I could only learn to prove it.
Search
Printer-friendly copy
1 User in Chat
