Can i use the rc 440 injectors for my car by themselves or do i need any resistor packs. I wan 440 since i am rebuilding now, and i was going to buy the 415 from HRC but found the rc injectors for a honda on ebay for cheaper. They are 440cc high impedance and saturated. Will these work fine or are these like the 450 that the DSM uses which we have to use a resistor pack with? Any help would be appreciated.

99 RS-T
"New bottom end(8.6:1 w/long rods)"
Turbonetics 60-1/Portfueler/etc!!!!!

Not sure about the exact injectors you are talking about, but I can tell you that Ford Motorsport injectors work fine. I have the green top 42lbers which is about 440cc. They are a direct fit and you can find them all over ebay. As a mater of fact I have 2 extra ones if you are inerested.
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

RC Engineering 440cc injectors are the top choice injectors for our cars. (in my opinion). Im running them now. You don't need a resistor pack. They are plug and play.

James