Does anyone have a copy of the disks which came with their 034 or a copy of the Super.exe file you use to program the 034EFI.

I really need this ASAP


I bought my 034 used on ebay and i did not get the software with it. I need it so i can get this thing programmed and running this weekend

go to 034efi.com and download it for free.

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...

no that does not seem to work

After i download the files the instruction file tells you to use the ECU 32 program (which is included on the disks?) to enter the license number 255-255-255

I do not have the ECU32 file or any of the other setup files that are listed in the instruction that download from the site.


There is a chance that the 034EFI I have could be bad also, i do not know for sure because i bought it used, it was claimed to be in good working order, but i have never seen it work. When the software (downloaded copy) trys to connect to the 034 the software basically locks up and will not make a connection, i hope this to be a software problem, which is why i want to get a copy of the files from someone which i know to be a functional.

Without getting this worked out soon i am going to have to resort to ordering a new 034efi until i can find out what is wrong with mine. My motor is broke-in i am just dieing to get this thing into some boost.

You've got the supplimentary ECU right? 8-injector setup? If so - Are you sure you downloaded the software for the supplimentary controller? This one - http://www.034efi.com/Applications/Super.zip

Unzip that to a folder and run super.exe

If you're having problems getting a connection - try reseting your computers COM port settings to default.


95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

I'll try really hard to remember to send you the old files. Hopefully, that will do it. The 034 guy is not the best at making instructions. He clearly asks you to input the code in the install instructions file, but there is no place to put the code in the super.exe file.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

The ECU32 program installs support files for the Super.exe application. No code is needed for the super.exe. It sounds to me like you have a problem with your PC. Make sure your using COM1, the program does not like other com ports. Make sure COM1 on your PC is using the proper hardware addresses. IRQ 4, I/O Range 03F8 I believe. Are you using a USB->Serial adapter? What version of windows?

____________________________________________________
four nails four corners four riders and four horses

OK, delete all the files on your computer dealing wiht the 034. click here http://www.034efi.com/Applications/Super.zip save it to whereever and install. Run the program and select com 1. make sure the unit is powered up and connected. That should solve your problem.

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...