Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 0 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #67936
View in linear mode

Subject: "how much timing adj. shoud i do @ 16psi" Previous topic | Next topic
tim97rsMar-30-04 04:18 AM
Donating 2GNT member
4255 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#67936, "how much timing adj. shoud i do @ 16psi"


          

im running 420's, SFMU, SAFC, MSD Dis-2, and my timing adv. at 16 psi is 17-17.5. my STFT are an avg. of +7. how much timing should i pull? sorry if this is a tad scattered of a question. im not all that familiar with the adj of timing in regards to WOT and high psi tuning.

thanks
tim

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: how much timing adj. shoud i do @ 16psi, Super20G, Mar-30-04 06:04 AM, #1
RE: how much timing adj. shoud i do @ 16psi, TeamXtremeRS, Mar-30-04 06:19 AM, #2
      RE: how much timing adj. shoud i do @ 16psi, extreme97nt, Mar-30-04 07:06 AM, #3
           RE: how much timing adj. shoud i do @ 16psi, Super20G, Mar-30-04 04:37 PM, #4
                RE: how much timing adj. shoud i do @ 16psi, Teametx, Mar-31-04 04:15 AM, #5
                     RE: how much timing adj. shoud i do @ 16psi, mitsudsr, Mar-31-04 06:34 AM, #6
                     RE: how much timing adj. shoud i do @ 16psi, Skrilla, Mar-31-04 07:24 AM, #7
                          RE: how much timing adj. shoud i do @ 16psi, TeamXtremeRS, Mar-31-04 09:44 AM, #8

Super20GMar-30-04 06:04 AM
Old School 2GNTer
2545 posts,
Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#67943, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 0


          

none IMO

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
TeamXtremeRSMar-30-04 06:19 AM
Member since May 20th 2003
6329 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#67945, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 1


          

Yeah don't pull any..just be sure to use at least 92 octane gas


13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)

My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
extreme97ntMar-30-04 07:06 AM
Donating 2GNT member
1649 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#67955, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 2


          

you shouldent have to pull timing unitl up around 20 psi

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
Super20GMar-30-04 04:37 PM
Old School 2GNTer
2545 posts,
Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68025, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 3


          

Originally posted by extreme97nt
you shouldent have to pull timing unitl up around 20 psi



yea, around there.. keep an eye on the advance as you keep upping the boost, start pulling timing past around 20 deg i say... and umm, make sure you give it enough fuel emoji

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
TeametxMar-31-04 04:15 AM
Donating 2GNT member
9740 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68053, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 4




          

~17 is almost perfect for 16 psi. I have run up to 22 psi on stock ignition timing. I had to run it a little rich at the 22 mark to keep the egt's down, but it worked well.

____________________________________________________
four nails four corners four riders and four horses

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
mitsudsrMar-31-04 06:34 AM
Donating 2GNT member
459 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68060, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 5


          

I ran 18psi the other day on the dyno and I only had 17deg. timing.
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
SkrillaMar-31-04 07:24 AM
Donating 2GNT member
1868 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68062, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 5


          

Originally posted by etx
~17 is almost perfect for 16 psi. I have run up to 22 psi on stock ignition timing. I had to run it a little rich at the 22 mark to keep the egt's down, but it worked well.


yup this is exactly what my car hits all day.

No timing needs to be pulled

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead
Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji
Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.
"fuck all motor" -turbo ate you

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
TeamXtremeRSMar-31-04 09:44 AM
Member since May 20th 2003
6329 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#68071, "RE: how much timing adj. shoud i do @ 16psi"
In response to Reply # 7


          

I also remember Matt_95tgs running 24 psi on the S16g with stock ignition and stock timing (around 17 degrees)


13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)

My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #67936 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.074 seconds, executing 30 queries.