#67575, "Spark Plug Gap? after rebuild questions?"
I have the rebuild kit and super 16g turbo setup, and will have it installed within 2-3 weeks. I have a screamin deamon coil pack and magnecor wires and ngk spark plugs, bkre6, what gap should they be, i am starting off fresh and new so i will be buying everyhting new. I have 30lb injecors, inline fuel pump, intank pump, v-sfmu, should i upgrade my injectors to run 15-16psi with race gas? Just a few questions i want to know so i can have this car running the way i want it for the first time. I also will be getting a new super 16g turbo soon before the rebuild is done.
99 RS-T "New bottom end(8.6:1 w/long rods)" Turbonetics 60-1/Portfueler/etc!!!!!
#67578, "RE: Spark Plug Gap? after rebuild questions?" In response to Reply # 0
Originally posted by freddy_00_69 I have the rebuild kit and super 16g turbo setup, and will have it installed within 2-3 weeks. I have a screamin deamon coil pack and magnecor wires and ngk spark plugs, bkre6, what gap should they be, i am starting off fresh and new so i will be buying everyhting new. I have 30lb injecors, inline fuel pump, intank pump, v-sfmu, should i upgrade my injectors to run 15-16psi with race gas? Just a few questions i want to know so i can have this car running the way i want it for the first time. I also will be getting a new super 16g turbo soon before the rebuild is done.
I use my fingernail to gap my plugs...
Just kidding... the ammount of gap you need to run can vary depending on your ignition setup, motor setu and the plugs you use... I get best results with a gap around 0.030.
#67583, "RE: Spark Plug Gap? after rebuild questions?" In response to Reply # 1
arent the 5e-11's one range hotter than stock if so why would he want to run that with boost, i thought turbo apps should run the ngk bkr7e-11 and gap to .030??
Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
#67624, "RE: Spark Plug Gap? after rebuild questions?" In response to Reply # 2
Originally posted by python6586 arent the 5e-11's one range hotter than stock if so why would he want to run that with boost, i thought turbo apps should run the ngk bkr7e-11 and gap to .030??
Yeah... most people run the BKR7... but I don't It works... that's all I'm gonna tell you. Runs better than with BKR6 also... I may try the MKR7 next time... but if the BKR5 runs perfect for me at 19psi... then why change..
#67632, "RE: Spark Plug Gap? after rebuild questions?" In response to Reply # 4
hey mrslick, what type of fuel system are you running for 19spi, i just want to run 15-16psi, so is my fuel setup all right for that since i will be rebuilt on 8.6:1 je pistons.
99 RS-T "New bottom end(8.6:1 w/long rods)" Turbonetics 60-1/Portfueler/etc!!!!!
Search
Printer-friendly copy
2 Users in Chat
