Currently I have a HRC Stage 1 kit installed which I'm going to be removing soon. Everything will be coming off with the exception of the Cartech FPR and inline fuel pump that came with the kit. Here are my questions.
1. If I just set the fuel pressure to stock internals, there shouldn't be a problem, right?
2. I know that I will have to remove a vaccum line from the BOV to remove the kit, will this cause problems not being hooked up?
Basically I want to know if I can remove the turbo/manifold/downpipe and put headers on while leaving the aftermarket FPR and fuel pump just the way its installed without causing any problems. Thanks in advance!
1996 Mitsubishi Eclipse RS - Sold 1992 Eagle Talon TSI AWD 1999 Dodge Ram 2500 4x4
#65737, "RE: Removing Stage 1, got a question!" In response to Reply # 0
Originally posted by Attrayant Currently I have a HRC Stage 1 kit installed which I'm going to be removing soon. Everything will be coming off with the exception of the Cartech FPR and inline fuel pump that came with the kit. Here are my questions. 1. If I just set the fuel pressure to stock internals, there shouldn't be a problem, right? 2. I know that I will have to remove a vaccum line from the BOV to remove the kit, will this cause problems not being hooked up? Basically I want to know if I can remove the turbo/manifold/downpipe and put headers on while leaving the aftermarket FPR and fuel pump just the way its installed without causing any problems. Thanks in advance!
It's fine. Since no boost is being made, then the fp won't rise, The fp should remain at the stock fp levels. I had my sfmu and accel inline fuel pump installed two months prior to boosting so I can speak from experience.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#65738, "RE: Removing Stage 1, got a question!" In response to Reply # 1
Yeah, kit is sold, is pretty much off the car with the exception of a few things but I didn't want to start it up without making sure there wouldn't be a problem.
1996 Mitsubishi Eclipse RS - Sold 1992 Eagle Talon TSI AWD 1999 Dodge Ram 2500 4x4
#65805, "RE: Removing Stage 1, got a question!" In response to Reply # 2
you undid all the oil lines right? and how did you close the oil pan up where you tapped it, as for the vaccum line just seal it off some way or you will have one hell of a vaccum leak and idle really high.
Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
Search
Printer-friendly copy
2 Users in Chat
