Here is a shot of the compressor inlet, it looks like it's going the wrong way.



Here is a link to the FP site with info on it. That's the only pic I could find of the inlet.

http://linux.forcedperformance.net/merchant2/merchant.mv?Screen=PROD&Store_Code=FP&Product_Code=NTDSM20G6&Category_Code=DSM


The outlet looks different, but I think it will bolt up to the hahn manifold. The wastegate outlet will just be open, which is fine until i get a proper downpipe. What do you guys think? Will this thing bolt up properly?

____________________________________________________
four nails four corners four riders and four horses

hahn uses t3 flanged mitsubishi turbos

that is why they are super16g turbos

that 20g has a 7cm/8cm/10cm mitsubishi housing

lookinto a gt seris cartridge gt seris 30/40 is a good combo
witha t3 flange. (the wheels are 30% more efficient then older garret wheels)

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.