i understand that the large clip intercepts the ignition clip, the brown is the p-brake, purpe is speedo, and black is ground.

but that do i splice into for the white, green, and red wires on the TT harness?

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

did you buy a wiring harness for a 95-99 eclipse/talon? if you did there is only like one wire you have to do anything with. the wiring harness goes inbetwee the main ignition harness. than the greddy harness connects to that. there are like 3 wires just hangin off the wiring harness with plastic over them. they do NOTHING, ignore them. only wire i had to do anythign with was connect the p-brake wire to the p-brake. i did nothign with the speedo wire, dont feel like messing with the ecu wiring.

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

those 3 wires do nothing? hrm...sounds hard to believe...i dunno.

i guess i will try it your way.

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

if you bought the wiring harness for an eclipse, then there are a couple wires that do nothing. there should be directions with it. mine came with them. just follow them. the harness goes in between the ignition harness. then there are wires coming off the harness of which they connect to the greddy auto timer. there also will be like 3 wires just hanging out of the harness with like somethign covering the wire end, they do NOTHING, they are for a different car, then you connect the e-brake wire for the harness to the ebrake wire ont he car, you connect the ground wire somewhere, and connect the speedo wire if you want. THATS IT!! I didnt use the speedo wire so i had to splyce one wire (ebrake) and then the ground wire. Thats all you have to do, thats is the point of buying a wiring harness for the car, so you dont have to splyce and find wires and stuff. if somethign doesnt work let me know but it should work fine.

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

what color wire is the parking brake wire on the 95 harness?

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

what are you guys talking about, doh

theres a red green and blue wire, if you dont have the harness you have to cut the plug off and splice into the right wires

the brown is e brake
purple is speedo

black is ground

red green n blue is a assortment of power, igntion and somethign else.. forgot and the manual that comes with it should tell you
i have a teg so cant tell you where your wires go, find a manual on the car or doa search

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

umm for the parking break you dont need it, but it works liek this.. if you have the car on the timer and someone gets into your car they could technically drive away

but once then throw that ebrake down it cuts off the tt and shuts the car down..

regardless the guy cant steer cuz there is no key in the igntion..

but just take the center section off and you should see a tiny wire going near the ebrake.. when you put it down and then pull it up you should see a lil button that you can press down and it will pop back up..that will be the wire

cuz when the ebrake is down theres 0 volts but when up 12..

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

If you have the harness then it should just plug in - that's it. Then you just need to ground the black and connect the brown to your e-brake as mentioned. I have the Greddy TT, installed in a half hour or so. If you really desperate I can check mine out for you - let me konw.

1999 Eclipse GST 4G63

thank you for the help...i was able to install it successfully!

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.