where can i get something similar to this:

locally? need response FAST!!!

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting

home depo in the plumbing section they even come with the clamps, not the best thing but i've had them hold 10 psi on my bros celica. hope that helps.

go to a industrial fitting or hose store

ask for hitemp silicone 3ply hose it should be black brown or blue

cost from 10-20$ a foot

houseofhose.com has it

home depot has pvc rubber pipe connectors that will work for a short amount of time if your desperate..

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

ebay

"couplers" or something to that effect. home depot like ^^^^ said
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.
chrysler kid> and fyi i have never HAD to shave.
DR1665> I'm sure your Talon and my Talon are all there needs to be, since we're the only two Talons that really matter around here

radiator hose.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

I've actually tried the plumbing hose connectors from Home Depot, and believe it or not, it actually held up to 18-20 psi runs for a few months now; but, I would rely on it too though. Radiator hose will always work, too.

___________
Kon C

"Sometimes, a man has to do what a man has to do."

bwahahaha

thanks

can't wait to finally have an fmic

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting

meh use nothing from home depot, that stuff isnt high pressure

if you have a napa locally go there and get thier radiator hose, tell them part 637,639.. etc each size has its own number

but that stuff works for about 15psi.. make sure you get at least one Heavy duty T bolt clamp, get more if you want..t hey are mad cheap there

i have a bunch of spare 2.25 hose at the house, but im in ny for the holidays

i would use the one t bolt clamp on the compressor....

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

I use couplers and clamps from www.turbohoses.com

They're the best out there.

I use the heavy duty radiator hose from Napa. This stuff is thick as hell..its about 12 bucks a foot. Used that along with their heavy duty clamps, and its never leaked or anything on me. Of course, its not a pretty as silicone couplers..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)