#62362, "T3 Turbo Attn: DarkOne" Dec-18-03 10:47 AM by Pyscodragon
I have a star setup w/ a T3/T4 w/ a blown oil seal .I have found a T3 factory rebuild for $200 .Now I figured it will all bolt up but it has water line.Do I need to hook those up and where or can I cap them off like Haun does for the 16g.What other problems might I run into? BTW its off of a Saab.
#62369, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 0
Just cap 'em.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#62373, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 1
did you just get the rebuild kit or are you usging a saab t3 turbo cartridge?
if its the cartridge those wheels are most likly differenet sizes and flow WAY less then the normal star turbo
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#62374, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 2
^^^ took the words right out of my mouth
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
#62385, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 3
For $200 I get the whole turbo that was rebuilt for the skip barber team down here then given to one of the local salvage yards he said it was for one of the saabs they used to use but stoped using and had no use for it anymore.Ive been buying parts for him through the car dealer that I used to work for so hes hooking me up I think what would one of these go for new w/ wastegate? And on the side is lowering springs and struts off a car worth $100 ?
#62393, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 5
the turbo may put out 7psi but 7psi from that small saab turbo is NOT the same as 7psi from the much larger star turbo.
the turbine housing is also different with a propriotary saab downpipe flange.
Bill
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#62398, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 6
The wastegate comes off its bolted to the flange.The flange is the same as the t3/t4 it Will bolt up to my setup its all the same Im just woried about the water lines but Darkone said to cap em off but w/ what I wonder? I just want to know If $200 is a good price for a factory rebuilt turbo? (because my t3/t4 has blown oil seals and needs a rebuild and god knows what else im no turbo balance tech. It basically comes down to $)besides I'm just putting this kit on my car to make it fun to drive at like 5-7 psi Im not going all out to make some screamer that will pop my stock rods and then be dumping like 2000 more into it for the rods pistons and fuel setup to run more I just want a lil more and Im askin If theres any problems w/ the turbo I know it wont put out as much cfm I just want to know If theres any problems other than that and If its worth the money or if I could buy one else where for cheaper. Thank you
#62405, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 7
Originally posted by Pyscodragon but Darkone said to cap em off but w/ what I wonder?
Cap 'em off, leave 'em open, doesn't really matter. You could use a brass plug, or just leave them open to the world.. if you're not putting coolant IN, you're not going to have coolant coming OUT, are you?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#62428, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 8
the only problem i forsee is if your putting that turbo cartridge in the star turbine housing and star compressor the wheels are the prong size for the housings if you just bolt on the saab turbo it should work fine
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#62521, "RE: T3 Turbo Attn: DarkOne" In response to Reply # 9
That was what I was planing on doing.But when I pulled the towel out of the intake side and spun the turbo it was hard to turn it spins but its ruff ...now its been sitin on the shelf for a while but hasnt been used since its been rebuilt, Is it still any good. Is it worth $200 or should I just buy a rebuild kit for my t3/t4 ($100) and try to do it my self
Search
Printer-friendly copy
1 User in Chat
