After 7 months of downtime, I test drove the car and the car spiked to 12 psi. I dont know why it spiked, i think the wastegate is fubar. Well, right now I think I'm not going to mess with it until the summer, so I can concentrate on school first, and save up for a rebuild, intercooler, and other goodies.

I wish you a smooth break-in and happy driving.

Mod lists here:
http://www.dsmregistry.com/detail.php?carid=1065

that really really sucks man it was probably the wastegate actuator. rip it apart and do a autopsy, what went first?
_________
96 talon esi-t
san clemente, ca

DarkOne> Screw you guys, i'm going home.

"drugs have taught an entire generation of american kids the metric system. "

I have an external wastegate. I think the piston rings went first, cuz i hear some tinkering (piston knocking on cylinder wall?)

I wish you a smooth break-in and happy driving.

Mod lists here:
http://www.dsmregistry.com/detail.php?carid=1065

do a compression test. ive had mine spike to 16 psi on stock internals. my wg signal hose came off. engine was fine.

compression test
160 180 180 180

Am I ok?!?!?!
What numbers are ok?

I wish you a smooth break-in and happy driving.

Mod lists here:
http://www.dsmregistry.com/detail.php?carid=1065

those are still decent numbers. was the car warmed up?

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

I got the temp to normal temps, but I didnt drive it because it runs like crap and sometimes stalls at idle. So am I ok? No blown motor? I also got a CEL 13 and 43. MAP and engine misfire?

I wish you a smooth break-in and happy driving.

Mod lists here:
http://www.dsmregistry.com/detail.php?carid=1065

i say, check your plugs. make make sure the wg is good.

and, the number are kinda low, try adding oil into the cylinder. and then do a comp. test. if the numbers go up, its the rings. if they stay the same. its the gasket going.

is there any smoke, if its blue prob is the engine but if ya got white smoke its the H.G but to make sure change the oil and drain teh coolant to see if any mixed, if so its ur Headgasket

Mods:
CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit

Cracked ring lands in #1. Sorry bro.

I think cracked ring lands would put him down below 80 psi. 160 is still high, just a little ring seal issue. Mabye you cracked a ring slightly.

____________________________________________________
four nails four corners four riders and four horses

It's cracked IMO. That's 11% difference in compression numbers.

I drove for 20k miles on cracked ringlands, with those same compression numbers. I broke 2 more pistons before I called it quits. Anyways he already hears problems, his ECU already sees problems, he has all the symptoms. Park it now and rebuild, it'll be cheaper in the long run.

Edit: If you really want to be sure, pop out the dipstick and feel for tiny puffs of air or wisps of smoke coming out of the dipstick tube. Also if you have a catchcan, look for more oil than usual spewing out the breather vent while boosting. (You can kick a good quart of oil out the breather in about 10 seconds boosting 12psi with 3 broken pistons- good times )