Can i install a sfmu, intank pump, all my lines before i do the turbo install? What's up with the other post about the bleeder valve and check valve thats the first time i heard about that.

Yes you can install your fuel system before your turbo...it's actually a pretty good way to spilt up the install. Because you won't be making any boost your smfu won't raise your fuel pressure acordingly. The system will just "think" that you never going into boost.

I'm not sure on the bleed valve thing...I'm closely following that thread myself. What I've picked up is that it fine tunes how much fuel you get while in boost.

Good luck with you fuel system, if you have anymore question don't hesitate to ask

getty up

-kent-




'98 Talon...gone, but not forgotten

If i go ahead and install will i have to change the fuel pressure? If you could i know i would need to run the hard spring but which disk? thank you

well if your running stock injectors I beleive that your idle pressure will want to be set at 40-45lbs...somebody back me on this please...or correct me. And if you are using the stockers then use the biggest disk.

getty up

-kent-




'98 Talon...gone, but not forgotten

SO thats about 40-45psi fuel pressure with stockers? Use the big disk with the hard spring right? thanks