Anyone have instructions on how to setup a manual boost controller to a tial 38mm wastegate?
Any information or links to information would be of great use.
Formally Project Solar Eclipse Now Entering 300ZX Land.
Jim Wolf ECU w/ Boost Jets Jim Wolf Pop Charger Intake Eibach Pro-Kit Lowering Springs w/ Fully Adjustable Gas Shocks B&B Exhaust - 3" w/ Dual 4.5 Oval Tips w/ 3" Test Pipes Konig Five-O 17X8 Rims w/ Polished Lip Blitz Turbo Timer /w Boost Gauge Freshly Painted Calipers Stillen Unorthodox Pulley Stillen Front Nose / Bumper Stillen Short Shifter New RPS Clutch / Pressure Plate / Flywheel - Holds 550 ft lbs of Torque New Fully-Built 5-Speed Transmission New Howe Radiator w/ 18" Electric Fan w/ Auto Thermostat Controller New Yokohama ES100 Tires All Around New Tension Rods New Fuel Injectors New Spark Plugs New Motor Mounts New Vacuum Hoses New Heater Core New Fuel Filter New Ignition Control Module New Hicas (4-Wheel Steering) Lines New Brake Pads / Brake Lines / Master Cylinder
#58129, "RE: Manual Boost Controller How To?" In response to Reply # 1
Right now i have a HKS EVC electronic boost controller... im wondering... I have the tial 38mm... Does anyone have a diagram of what hoses go to what on the tial wastegate??
Formally Project Solar Eclipse Now Entering 300ZX Land.
Jim Wolf ECU w/ Boost Jets Jim Wolf Pop Charger Intake Eibach Pro-Kit Lowering Springs w/ Fully Adjustable Gas Shocks B&B Exhaust - 3" w/ Dual 4.5 Oval Tips w/ 3" Test Pipes Konig Five-O 17X8 Rims w/ Polished Lip Blitz Turbo Timer /w Boost Gauge Freshly Painted Calipers Stillen Unorthodox Pulley Stillen Front Nose / Bumper Stillen Short Shifter New RPS Clutch / Pressure Plate / Flywheel - Holds 550 ft lbs of Torque New Fully-Built 5-Speed Transmission New Howe Radiator w/ 18" Electric Fan w/ Auto Thermostat Controller New Yokohama ES100 Tires All Around New Tension Rods New Fuel Injectors New Spark Plugs New Motor Mounts New Vacuum Hoses New Heater Core New Fuel Filter New Ignition Control Module New Hicas (4-Wheel Steering) Lines New Brake Pads / Brake Lines / Master Cylinder
#58130, "RE: Manual Boost Controller How To?" In response to Reply # 2 Oct-08-03 12:41 PM by Kirby
Well it would go to the same port that it went to before the boost controller. Have you boosted the car yet? If you have then just put the selonid in between the boost source and the WG. Here is Tial's website http://www.tialsport.com/index.htm but the pics of the directions don't work though. In a few pics of the WG it looks like there is only one nipple on the unit that is on the side, that should be your signal line attachment point, according to the pic it's the only one with a nipple for the hose to attach too. It should be the one on the side and not on top of the unit. I hope this will help you.
I edited to the wiki!
Originally posted by DR1665 NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.
Search
Printer-friendly copy
0 Users in Chat
