buy it for 200 bux.. buy the 5 wire o2 sensor (which does narrow band for the car), and buy the software for $30 and you have a complete datalogger and wideband in one.
you have to put it together though.. its not hard.. im going to buy the kit on friday and put it together.. if anyone would like me to build them one, i will.
#58000, "RE: wideband + datalogger" In response to Reply # 1
i went to websight, which kit/sensor is for us?
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#58026, "RE: wideband + datalogger" In response to Reply # 3
sweet! keep us updated
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#58064, "RE: wideband + datalogger" In response to Reply # 4
I use the LM-1 its a 6 wire wideband and you dont have to put it together plus it comes with the software and gives you the ability for free updates online. You cna hard wire the wideband in so it will work as your main O2 I use it conjunction with my narrow band (4 wire) This datalogger does 44 min of logging in different sessions if needed. you can do Lambda and A/F in conjunction with RPM. Its pretty sweet. I think you can check it out at www.tuneyourownride.com.
#58117, "RE: wideband + datalogger" In response to Reply # 6
I have the TechEdge v2.0 in my car. You'll need to get a bung welded into the downpipe for the extra o2 sensor, and run power and ground wires. That's it. There are several logging software programs out there for free on the wbo2 yahoo list. They work pretty well. I have the the pre-built v2.0 kit with the 5301 display, and the 6066 sensor. All together it was around $550 shipped from Australia. I highly recommend it to anyone trying to tune on their own. I had my target AFR dialed in with only 3 drag strip passes using the logger for the wbo2 and the Support software for the e-manage.
Greg
'19 Genesis G70 3.3t AWD '88 Chrysler Conquest TSI