How did you guys connect the fuel hose from your fuel filter to the OE hardline? If anyone can get some pics of there fuel system back there, that would be badass!

"Natty Ride"


http://dirty.thisfreedumb.com/

just put the rubber fuel line hose over the hard fuel line and put 2 clamps on it, works good
_________
96 talon esi-t
san clemente, ca

Uberingram> I bow down to the Geo

Doesn't it have the treaded piece over it that went into the stock FPR? Do I need to cut it off?

"Natty Ride"


http://dirty.thisfreedumb.com/

Yup, it's got the threads. Just slam it on right over the threads and put 2 clamps on it like mentioned ^^^. It'll work great for ya.



1999 Anniversary Edition
HRC Stage II w/FMIC

"The problem with the gene pool is that there is no lifegaurd"

yep, i just put the rubber fuel line from the filter over the hardline and used two clamps. i even had to cut the hardline a little bit just to shorten the lenth (not required though).

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, costum dp, dynotune fp gauge. gst muff, turbo spoiler

i DONT reccomend cutting it...unless u can barb up the end like how it comes. u need that lip to make sure the hose stays on the the clamps
_________
96 talon esi-t
san clemente, ca

Uberingram> I bow down to the Geo

Can't we just connect it with a fitting? Does anyone know what size it is? This is the only part holing me up from ordering the rest of my fuel setup. Thanx for the info though.

"Natty Ride"


http://dirty.thisfreedumb.com/

The fitting on the end of the hardline is called a banjo bolt. When you take it out, it's like the weirdest thing ever. It's definately easiest to do it the way described. I used steel braided fuel lines.


1999 Anniversary Edition
HRC Stage II w/FMIC

"The problem with the gene pool is that there is no lifegaurd"