Does anyone know place where I can find a super 16g oil feed and return kit, that takes paypal? if anything, I need the return flange that bolts onto the turbo w/gasket.

any help would be appreciated.

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

try talking to hahn. maybe see if they can work out a paypal purchase.

dude, if you are talking abotu the return tube/flange that bolts on to the bottom of the center section, I have a spare. the gasket is a standard 4g63 oil return gasket that is found at the oil pan/return line. Any mitsu dealer shoudl have it. only 99cent at norco, mitsu.

I'll hook you up if you cover shipping.

-K-

Yeah, for the return line I went to CarQuest and they made me a hose with the proper fitting at 90 digree angle and 300 digree hose. The fitting was clamped on, it was waaaaaaaay better than the HRC one. Just look around for the parts, take yo ass to the depot. home depot. The oil feed line is an Autometer 4 AN SS fuel line you can pickup at a local performance shop such as ramchargers. The T that goes into the block at the sending unit is available at home depot, I have seen them. A little running around should get you everything you need.

____________________________________________________
four nails four corners four riders and four horses

You can get the 1/2" NPT drain flange w/ gasket from turbonetics.com and then go to summit and get the AN fittings you want. Summit even has a weld-in bung for the oil pan. TIP: use 90* fittings at the turbo and oil pan.