i was tightening my manifold bolts and used a 13mm wrench on the farthers bolt to the right (facing the car's rear with the hood open) to tighten all the bolts. the top of stock bolt used to hold the hrc manifold fartthest to the right tore off!!!
#55715, "RE: how fucked am i?" In response to Reply # 0
well your going to want to fix it soon. you dont want to warp your hrc manifold and have a exhaust leak... Michael 99gs HRC Stage IV 8-Injector Setup 2GNT Member #32
#55740, "RE: how fucked am i?" In response to Reply # 3
I have had some issues with bolts breaking on the head. I recommend taking off the manifold. If enough of the broken bolt is still sticking out of the head, just get some vice-grips and twist that thing out. If it broke off further in, you may have to use an easy-out and possibly have to heli-coil the hole.
Its a pain to take off the manifild if you have not done it before, but just take your time and you should be ok.
#55743, "RE: how fucked am i?" In response to Reply # 4
>I have had some issues with bolts breaking on the head. I >recommend taking off the manifold. If enough of the broken >bolt is still sticking out of the head, just get some >vice-grips and twist that thing out. If it broke off further >in, you may have to use an easy-out and possibly have to >heli-coil the hole. > >Its a pain to take off the manifild if you have not done it >before, but just take your time and you should be ok.
whats an easy out and heli-coil? i'll swing by homedepot and check what they have over there.