Hey guys... I've searched but I can't find a clear pic of how to mount the 1g SMIC. I cant get mine to stand straigh up? Does anyone have any pics fo their setup... I need to see the area in front of the drivers side wheel well where the IC sits and also the upper IC piping where it connects to the IC. Thanks.

Here are a few of my pics.

The top bracket on the 1G will line up with a hole in the underside of the framerail. I just used a normal nut/bolt to hold it on. I also fabbed up one metal bracket to bolt to the 1G SMIC and then to the car for added support. I removed the fog light housing, and black vent cover in the front bumper(97+ eclipse bumper), and made some air deflectors to direct all the air coming in from those 2 openings, into the IC.





Engine bay view: You will have to loosen up the fuse box and get some room to take out the plastic liner under it. You also will prob have to cut out part of the black metal fuse box bracket to get room for the top pipe. The top pipe needs to be coming out at around a 45 degree angle to clear the fusebox.



At the bottom of the metal flashing, you can see the long bracket i made that connedcts to the car and other IC mounting piont.


I will be making a set of custom welded IC piping for this setup, if its mounted like this, and you have a HRC turbo kit, if you are intersted. Check out my post in this section. It will look 100 times better than what i have on my car now..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

I can't do that mounting for some reason because i have some device there? Is it my ABS? and can i get rid of it so i can mount this better and further back?

Mods: Short Ram Intake, Frankenstiened TB, EGR Block Off, Fart Pipe, Gutted Cat, UDP, ractive coilovers, 2"-3" drop, and more to come

You must be talkign abotu the horn... move it somewhere else...

-K-

hahaha it wasn't my horn it was my ABS. I just cut all my brake lines and just took it out and rerouted the brakes to just the front. a lot more room down there i tell ya. know i can't even find a spot to use the intercooler mounts to mount it to my car. I think i have to weld some on there. Its all zipped tied right now...DON'T WORRY!!! it will be bolted up. THANKS 2GNT FOR EVERYTHING!

Mods: Short Ram Intake, Frankenstiened TB, EGR Block Off, Fart Pipe, Gutted Cat, UDP, ractive coilovers, 2"-3" drop, and more to come