#54596, "What Injectors Will Fit My Wire Harness..."
I guess the 480cc injectors that i have won't work i haven't had much luck getting any response from my other post.... Here is what i have:
Fully Built 420A Motor - 8 to 9 to 1 compression je forged pistons crower rods bored .20/stock venom fuel rail venom intake manifold bored throttle body 1lb FPR S-AFC MSD Ignition MSD High pressure inline fuel pump MDS coil pack 12g fuel cell Innovative T3/T4 Hybrid Turbo Greddy FMIC 480cc denso fuel injectors that don't seem to fit the current wire harness right.
This is everything that i can think of that has anything remotely to do with the engine and fuel control. I think i may need a set of new injectors.... Anyone know where i can get a decent set of injectors.. i would like something that can handle some decent power..
Formally Project Solar Eclipse Now Entering 300ZX Land.
Jim Wolf ECU w/ Boost Jets Jim Wolf Pop Charger Intake Eibach Pro-Kit Lowering Springs w/ Fully Adjustable Gas Shocks B&B Exhaust - 3" w/ Dual 4.5 Oval Tips w/ 3" Test Pipes Konig Five-O 17X8 Rims w/ Polished Lip Blitz Turbo Timer /w Boost Gauge Freshly Painted Calipers Stillen Unorthodox Pulley Stillen Front Nose / Bumper Stillen Short Shifter New RPS Clutch / Pressure Plate / Flywheel - Holds 550 ft lbs of Torque New Fully-Built 5-Speed Transmission New Howe Radiator w/ 18" Electric Fan w/ Auto Thermostat Controller New Yokohama ES100 Tires All Around New Tension Rods New Fuel Injectors New Spark Plugs New Motor Mounts New Vacuum Hoses New Heater Core New Fuel Filter New Ignition Control Module New Hicas (4-Wheel Steering) Lines New Brake Pads / Brake Lines / Master Cylinder
#54601, "RE: What Injectors Will Fit My Wire Harness..." In response to Reply # 0
I have Lucas 440's for a honda from ExtremePSI and they clip straight in and are a high impedence injector, no resitor pack needed. Pretty much all late model honda injectors will work with the factory harness because they are OBD II as well.
______________________________________________________________ 1999 Civic SI, Boosted and built, 12.67@112.
Gone but not forgotten..... 1998 Eagle Talon ESI, built and boosted 14.2@98 1992 Eagle Talon TSI AWD12.91@104 1992 Honda Hatch swapped and sprayed14.0@108
#54602, "RE: What Injectors Will Fit My Wire Harness..." In response to Reply # 0
Accel injectors should work fine too, and they're cheap. They sell them at Summit Racing (www.summitracing.com).
1996 Eclipse RS / 5-Speed / Body Components by Aerogear / Coated in Magnetic Red Metallic v2 - More at http://home.insightbb.com/~mgalyan/ Mark Galyan - Greenwood, Indiana