Anyone dyno`d their stage 2 and what PSI? I just want to know where my car stands right now.

I have seen between the 190-220 range depending on supporting mods and state of tune running between 9-12psi.

05 Mazda RX-8
06 Lotus Elise

I did. The numbers are in my sig....



14.7 @ 93mph / 7psi 185hp/180tq

8psi but spiked to 10psi and oil started coming outta the breather like crazy. So while blowing motor and losing compression in #1 and #4 cylinders I put down about 196WHP and 190TQ. Thats w/ just 2 mufflers and stock piping cause I couldn't get anyone to fit dual 2 3/4" piping to match my downpipe. No mods except the turbo kit.
-Dave

2009 Corolla S - waiting until 2012 for my next toy!
*SOLD* 1992 3000GT VR4 - pearl white and 45,6xx miles!
*SOLD* 2007 Subaru Legacy GT sedan
*SOLD* 95 Mitsubishi 3000GT VR4 - BPU
*SOLD* 97 Eclipse GS Star Stage 2

9 psi, 202whp and 201 ft-lbs thru the very parasitic atx in a horrible state of tune (a/f was BELOW 10:1, the dyno-shops computer didnt go any richer than 10:1, so if you look at the dyno sheet, my a/f looks like a str8 line across the bottom of the chart, lol)

at 7 psi on the same day, the car made 180whp and 180ft-lbs

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

192.5hp at 7-8 psi. only supporting mods were the afx udp.

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

the game, what mods you have?

264whp @ 12psi of boost

wow 264 at only 12PSI? thats good!

175whp at 3psi with only exhuast. I have the dyno sheet if anyone wants to see it. Or even e-mail mitseclipse. He had it on the dyno. E-mail me and i can give details on setup sfp made the turbo kit.

What Mods do you have silver GS.


Nick
97RS

turbo8u> shut your SUCK

when it was dyno'd it was stock for the eception of the exhaust. 3inch down pipe to 3in high flow cat to 3 inch exhaust. Every tihng eles stock. It's a t3t4 turbo. Hit me up and i will send the complete specs of it all. And the dyno sheet.

>175whp at 3psi with only exhuast. I have the dyno sheet if
>anyone wants to see it. Or even e-mail mitseclipse. He had it
>on the dyno. E-mail me and i can give details on setup sfp
>made the turbo kit.

why only 3psi ?



http://www.BerkshireCountyImports.com

The wastegate has a 3psi spring.

Why didnt u raise it for the dyno?


http://www.BerkshireCountyImports.com

humm..... when i dyno'd i had.... hrc stage 2 kit w/fmic, greddy bov, missing link, vortech s-fmu, plugs, wires, 2.5 hi-flow cat, and 3" thermal exhaust.



14.7 @ 93mph / 7psi 185hp/180tq

Because the previous owner had just gotten the kit on and he did not have a boost controler then. he ended up going i do belive at 14.30 at 8psi. Also all stock except for the exhaust.

175WHP with only 3PSI?

yes 175whp at 3 psi. I sent u a instant message but ur away mesage says ur gone but u just posted?

I will be re dynoing it this month or next. Will be pushing 20 psi or so. I now haev a built bottom end built head and all that stuff. I am shooting for 350whp now.

@ 10-11psi I hit 225.7whp and 227.2 torque tuned to like, oh, 10.2-10.8 on the wideband. I've got the billet Cartech, 30lb injectors, HRC Stage 1 kit, GReddy FMIC, 1G crushed BOV, and a 3A Racing exhaust can. My exhaust is about to be redone and as soon as I get the S-FMU and a S-AFC II, I'm HOPING to up the boost to like, oh 14-16psi and hit almost 270@ the wheels. Oh, I almost forgot, I've also got a rebuilt block with JE 8.8:1 pistons, Eagle rods and bored .020" over.

Jeremy

96 Indy Red Dodge Avenger I4 5spd
225.7whp/227.2wtq @ 10psi, currently running 12-14psi.
HRC Stage III turbo setup
JE 8.8:1 pistons
Eagle rods
block bored .020" over
GReddy FMIC w/ custom piping
1G crushed BOV
SPEC Stage 3 clutch
2.5" DP, 2.5" high flow cat, 3" ERT catback w/ Magnaflow muffler and 3" tip.
much much more...

silver gs. oh i was at school when i posted that... i just got home now and i got your message... i'll im you when you get on.. laterz