checking bearings , dont know torque specs for the rod end caps and eagle is closed for the weekend. Also what kind of lube do ya use on the bolts, when putting them back. PLEASE HELP !!!!!

Mark Dollar
Stage 3-4 Turbo
See my White Avenger @
WWW.Armond30.com

28 ft lbs. You MUST use the ARP moly lube, or anther type of moly lube on the rod bolt threads, to get an accurate torque reading.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

THANKS A LOT buddy.
You are 100% positive it is 28ft/lbs ????
Where did you get that info from???
I have the sheet that came with my rods, and it says this
BOLT IDENTIFICATION Torque
7/16" ARP 8740 7/16" bolt head 63ft.lbs
7/16" ARP 2000 7/16" bolt head 75ft.lbs
7/16" ARP L-19 1/2" bolt head 79ft/lbs
3/8" ARP 2000 7/16" bolt head 43ft/lbs
5/16" ARP 2000 3/8" bolt head 28ft./lbs

I know the bolt is 3/8"
My question is, Is it the 3/8" ARP, (on the left, under BOLT)
or is it the 3/8" Bolt head that I see (in the middle colum under identifcation)

Thanks!!!!!!!!!!!!!!!!!

Mark Dollar
Stage 3-4 Turbo
See my White Avenger @
WWW.Armond30.com

Its the 5/16" ARP 2000 bolts, if you are using the Eagle rods. My rods came with a product part guide, and it listed the 420A rods as the ones i just mentioned.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

He knows what he's talking about!

Cool thanks a lot man!!!!!

But I never said he didn't know what he was talking about, I know he knows what he is talking about. Just wanted to be 100%. These are my rods.

Mark Dollar
Stage 3-4 Turbo
See my White Avenger @
WWW.Armond30.com