#51921, "RE: Can you use a electronic boost controler with a external wastegate?" In response to Reply # 0
Of course you can. Why wouldn't you be able to?
You are not your job. You're not how much money you have in the bank. You're not the car you drive. You're not the contents of your wallet. You're not your fu**ing post count.
#51939, "RE: Can you use a electronic boost controler with a external wastegate?" In response to Reply # 2
Well there are 2 different ways. You either put the B/C selonid between a vacume source at the manifold and the wastegate. Or you put the selonid inbetween your turbo and the wastegate. You install it just like a manual boost controller as far as placement goes. If I were you I would take a the source from the manifold, and plug that little nipple thing on the turbo. Just take out the nipple thing and get a plug with the same size threads and install that. Then the B/C will be running off the pressure that is acctually in the manifold rather than just at the turbo.
I edited to the wiki!
Originally posted by DR1665 NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.
#51946, "RE: Can you use a electronic boost controler with a external wastegate?" In response to Reply # 4
you can use any boost controller you want, manual or electronic. a ext wg still has the same functions of a internal. a boost controller just alters signal.
DWAYNE H www.gottude.com Red/Black/Silver 01 GSXR 750 Lots of Apexi components...
Search
Printer-friendly copy
1 User in Chat
