i might buy one. let me know what you guys think about it. also what would be a good wideband point to tune for at wot? i assume it would matter what boost level your running also right?
http://www.zeitronix.com/Products/WideBandO2/WideBandO2.htm


Michael
99gs (broken) Motor being built now
HRC Stage 2 8-Injector Setup
Stage 3 process begins 2 months till im built. hehe
2GNT Member #32

I think that if you have the time you could build your own very easily for alot cheaper. That does not sound like a 'deal' but if you want one.......it is a plug and play setup for $430.

Kevin
The old:


The new:

does a wideband output the same voltage? 0-1v ? Cause I could just get a wideband o2 and hook it up to my apexi turbo timer, it give me the o2 sensor voltage and the A/F ratio. The apexi tt is only $100, i dunno how much the wideband o2 is...

edit:
Answered my own question. but check this out:

http://www.forparts.com/BoswidebandO2.htm

It sounds like it works just like a regular o2 exept when the mixture is rich the voltage will be negative, when its lean the voltage is positive, and when its stoich (14.7:1) the sensor will read 0 volts. thats badass. its telling you exactly how much you need to adjust your fuel. guess what im going to buy today!


edit2:

HOLY SHIT! this is badass! dude make one of these, it says it costs about $200 bucks to build, including the sensor!
http://www.diy-wb.com/

____________________________________________________
four nails four corners four riders and four horses

and check this link out also.

http://www.techedge.com.au

____________________________________________________
four nails four corners four riders and four horses