#50515, "RE: those with 30ibs" In response to Reply # 0
well i have the sfmu, so it's adjusted by the static adjustment screw. it's at about 29psi now, but i've been having some special situations lately which is why it's so low.
#50516, "RE: those with 30ibs" In response to Reply # 1
My guess would be, for 30lb injectors, roughly 30psi static pressure, and roughly 20psi pressure at full vacuum. That seems to be what i see the most.
For what its worth, though, you don't want your full vacuum pressure to be lowet than about 20psi. After that, the atomization of the fuel becomes erractic and poor and idle quality will suffer, as well as (potentially) low RPM/low THR/low load throttle response.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#50529, "RE: those with 30ibs" In response to Reply # 2
>My guess would be, for 30lb injectors, roughly 30psi static >pressure, and roughly 20psi pressure at full vacuum. That >seems to be what i see the most. > >For what its worth, though, you don't want your full vacuum >pressure to be lowet than about 20psi. After that, the >atomization of the fuel becomes erractic and poor and idle >quality will suffer, as well as (potentially) low RPM/low >THR/low load throttle response. >
Yep, exactly. I see about 20-21 psi at idle, and about 30-32 psi at 0 vac. I def have noticed the throttle responce has degraded also. If i do a quick rev of the gas, it's not instant revving. The low fuel pressure i'm sure has something to do with it.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#50643, "RE: those with 30ibs" In response to Reply # 5
alright! i DO (took a while to figure that out) have accel 30's. Why do i seem to be so different from everyone else with my fuel settings? Static is 28psi, idle is 17ish psi, stft's are good at around 3-5's, and im STILL hitting 1.03v average A/F @ WOT, EGT's seem to be good at 1400*-1500*, running 7 psi, short spring & 2.72" disc.
ideas?
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#50659, "RE: those with 30ibs" In response to Reply # 6
i bet your o2 is shot. mine was gradually going and i as seeing over 1v on the a/f no matter what fp i was at. after it was replaced everything turned normal.
#50665, "RE: those with 30ibs" In response to Reply # 7
Hey tim your numbers are about the same as mine. my idle pressure is 17 psi, anything higher the car will stall out. I was thinking about tring to turn it up to 20 psi and reset the ecu to learn new trims and have a little higher fp under boost but at wot I only get 1450*F MAX on the egt, so i guess i dont really need to. The car idles great at 17 psi and the throttle responce dosen't seem too bad.
____________________________________________________ four nails four corners four riders and four horses
#50687, "RE: those with 30ibs" In response to Reply # 8
I have mine at 30 psi at idle and with the vacuum hose disconnected, it's at 50psi. If I leave it at 20psi for idle, I would eventually get the CEL 51. Tuning her can be a pain the arse sometimes.
intricatelines.com/ -graphics and vinyls
"Tell them of us and say, For their tomorrow, We gave our today." -- The Kohima Epitaph
Search
Printer-friendly copy
2 Users in Chat
