Im in desperate need of AN fittings. Where can I get them for cheap? Do any stores sell them? I tried looking in Autozone and Home Depot but they dont have any AN fittings.
NeoVB 2005 Subaru Impreza 2.5RS 1997 Mitsubishi Eclipse GS TURBO 1995 Mitsubishi Galant ES DOHC TURBO 1991 Eagle Talon TSI AWD
#50159, "RE: Where to get AN fittings?" In response to Reply # 1
You can find some at most autozones but you have to show them where they are....lol I would call summit though as they carry those ^^^^ companys entire lines of fittings.
I edited to the wiki!
Originally posted by DR1665 NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.
#50165, "RE: Where to get AN fittings?" In response to Reply # 3
pegaus auto racing has them. they carry a lot of different fuel fittings. You may also find them at aeroquip. AN fittings are special fittings you will not find them anywhere. look and see if there is an aeroquip store near you. their website will let you know.
-97 GS (First project, 299 whp)(sold) - 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out) - 99 GS OZ, Hahn Kit, 56k miles (Sold) -------- - 00 Nissan Maxima GLE (Daily Driver) - 02 Audi A4 1.8T Quattro
#50242, "RE: Where to get AN fittings?" In response to Reply # 5
Okay I just need one 4AN to barb fittings... NO place I can look has one. The fuel rail fittings is a 4AN male, right? Where has anyone gotten thier fuel rail fitting?
NeoVB 2005 Subaru Impreza 2.5RS 1997 Mitsubishi Eclipse GS TURBO 1995 Mitsubishi Galant ES DOHC TURBO 1991 Eagle Talon TSI AWD
#50244, "RE: Where to get AN fittings?" In response to Reply # 6
bro are you just being ignorant..... i gave you the website where most everyone i know has gotten their an fittings..... if your not going to use the site then quit asking where to get it......... if you don't have a speed shop near you then you have to use the internet..... bottom line
#50255, "RE: Where to get AN fittings?" In response to Reply # 6
Sorry bro, but im not being ignorant. I checked that site, and I didnt see any 4AN female to hose... They have 4AN male to hose, but the last time I checked the fuel rail test port was a male fitting. Maybe I missed it but somehow I dont think so. I checked all the local performance shops, and the majority of them never even heard of 4AN to hose fittings... some of them have 4AN fittings which attach to stainless steel lines but I dont have stainless steel lines so those are useless to me. I found 6AN fittings for the SFMU, I just need that one for the fuel rail. If you got yours from there, then maybe you can give me a part number so that I can get it too. I called them + sent them an email as well.
NeoVB 2005 Subaru Impreza 2.5RS 1997 Mitsubishi Eclipse GS TURBO 1995 Mitsubishi Galant ES DOHC TURBO 1991 Eagle Talon TSI AWD
#50266, "RE: Where to get AN fittings?" In response to Reply # 8
are you tapping off your test port for your return line or something? i had to cap off my test port after i took off my wet nitrous kit about two years ago, cause i lost the schrader valve that goes in it. i just used a regular flare fitting cap. it threaded right on there...and hasnt leaked for over 2 years. www.TeamKLR.com 1997 Silver RS Wiseco 10.5 Pistons Eagle Rods T3/T4 Turbo Custom FMIC Greddy Exhaust 440's
#50287, "RE: Where to get AN fittings?" In response to Reply # 9 Jun-10-03 04:23 PM by XtremeRS
HRC has those fittings, they come in their kits. Also, Summit may have them, Aeroquip makes them. I got the 6AN fittings for my SFMU, the ones made by Aeroquip. If anything, HRC has the fuel rail 4AN fitting for sure... These are the 6AN fittings i got: http://store.summitracing.com/partdetail.asp?part=AER%2DFCM1512 Your best bet is HRC. BTW, its a 4AN FEMALE to hose barb fitting. HRC's is 4AN female to 1/4" fuel hose fitting. Its very hard to find a 4AN to hose barb fitting for some reason. I also couldnt find any from Aeroquip, but i only spent a few minutes searching. HRC's fitting is brass also, so its prob not a performance piece..Its a rare part for sure
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
Search
Printer-friendly copy
0 Users in Chat
