I bought some 3/8" female flare > 3/8" barb adaptors to use on the SFMU at home depot, and 1/4" female > barb for the fuel rail. 3/8" is supposed to be 6AN, 1/4" is supposed to be 4AN, right? If so, then why does nothing fit, both of the fittings are way too big. Do I have the wrong sizes?

NeoVB
2005 Subaru Impreza 2.5RS
1997 Mitsubishi Eclipse GS TURBO
1995 Mitsubishi Galant ES DOHC TURBO
1991 Eagle Talon TSI AWD

All standard sizes(1/2", 1/4", ect,) are all called NPT(National Pipe Thread) fittings, and AN fittings are totally different, as AN fittings are meant for a flared end. NPT are just normal threaded ends. The SFMU needs a 6AN fitting, with a hose barb on one end(thats what i used). I could be mistaken, but i believe all AN fittings are metric.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

So where could you get AN fittings? Preferrably somewhere not online cause I cant really wait for them to arrive, I need my car lol. Would places like Autozone or NAPA have them?

NeoVB
2005 Subaru Impreza 2.5RS
1997 Mitsubishi Eclipse GS TURBO
1995 Mitsubishi Galant ES DOHC TURBO
1991 Eagle Talon TSI AWD

You will have to get them online, or a car shop to get them.

autozone places *may* have some, but doubtful, only place ive seen them are real car shops, especailly a lot of the v8 shops...

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

the only retail parts store i have seen that carrys them is checker. one of the checkers here in town has a performance section that carrys autometer, nos, arp, msd and shit like that. but a normal checker won't.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

search for a hose or industrial fitting store in your area..

House of Hose

etc...

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

www.anplumbing.com has all that you need

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

Be careful when buying fittings locally. Alot of places sell SAE flare fittings that look just like AN fittings. They are not interchangeable. You will most likely have to order them.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire