okay, i think i may have bought bigger injectors than i intitaly thought. is there a way/can you figure out what size injectors i could possibly have this info:

walbro 255 lph pump
static = 33psi
idle = 22psi
boost @ 6psi = 56-58psi
A/F readings @ 6psi = 1.03-1.05v

thanks
tim

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

sound like 310's. I have 330's and my idle pressure is at 19 psi and my stft is right around 0.

____________________________________________________
four nails four corners four riders and four horses

okay, so it is possible to run lower than what most have said is normal. im still real rich at the numbers above, so i'll try turning it down a little more and see what that gets me

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

forget turning the fuel pressure down under boost, I say turn the boost up!

intricatelines.com/ -graphics and vinyls

"Tell them of us and say,
For their tomorrow,
We gave our today."
-- The Kohima Epitaph