What gaskets are needed for the turbo install?

NeoVB
2005 Subaru Impreza 2.5RS
1997 Mitsubishi Eclipse GS TURBO
1995 Mitsubishi Galant ES DOHC TURBO
1991 Eagle Talon TSI AWD

well if your just doing a turbo install you'll need a new exhaust manifold gasket and a gasket where the dp meets the exhaust...other than that your fine..if your doing a rebuild then replace every last one of them...

400whp or bust.

I'd say get a new exaust mani gasket, and a new oil pan gasket. Both gaskets are excellent quality, and can be reused if in good shape. If the car has higher miliage on it, then use new ones. If you are under maybe 75,000 miles, the stock ones should be ok to use. Get new ones just in case. They aren't that expensive anyway.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

You dont need a turbo/exhaust manifold gasket?

NeoVB
2005 Subaru Impreza 2.5RS
1997 Mitsubishi Eclipse GS TURBO
1995 Mitsubishi Galant ES DOHC TURBO
1991 Eagle Talon TSI AWD

Are you getting a kit? or is this a custom setup? If its a HRC kit, then it comes with all turbo gaskets, dp gaskets, but no exaust manifold or oil pan gasket. If its a custom kit, then you need to find the mani to turbo gasket, and the turbo to DP gasket.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Custom kit... im almost done collecting everything, basically all I need now is the flanges and gaskets and IC piping.

NeoVB
2005 Subaru Impreza 2.5RS
1997 Mitsubishi Eclipse GS TURBO
1995 Mitsubishi Galant ES DOHC TURBO
1991 Eagle Talon TSI AWD

Do yourself a favor (you may know this already) get your gaskets at a Chrysler dealer instead of Mitsu. Much cheaper. I got both my oil pan gasket and exhaust mani gasket from them no problem. Had them in stock, took 10 minutes of my time. If you need part numbers let me know.

.
Yes officer, the windows are mirrored.

1999 GS Special Edition

How much are you guys paying for Exhaust mani gaskets? My local Satan and Dodge want $33 for it :o I literally told them to suck it, and got lots of $7 Felpro composite gaskets from Autozone.

Gaskets I blew within 1 month of boost: (Might wanna get extras of these)
Exhaust manifold (Several times now, because of crappy manifold bolts)
Turbo oil drain
Turbo Downpipe (3 bolt triangle pattern) Sold at autozone as "Header collector"
Downpipe to Cat (2 bolt pattern)
Downpipe U-bolt clamp