#45853, "RE: A/F Gauge - Where do I Tap it into?" In response to Reply # 0
"Autometer A/F ratio gauge:
Connect the power wire to your cigarette lighter.
Connect the ground wire to the car.
Connect some more wire to the purple wire and run it through the firewall to the PCM between the driver's side shock tower and the fuse box. Remove some of the wire loom away from the upper wiring harness and you will find a white wire with a black stripe on it, this is your O2 sensor wire you need to splice into."
#45874, "RE: A/F Gauge - Where do I Tap it into?" In response to Reply # 4
there should be 3 wires in the cig lighter... black = ground, white = power, and the third is for the bulb and i think its green. im pretty sure thats it.
-Joe ___________________________________ White 98 Eclipse GS MT Star Stage 2 *Stolen - 10/24/03*
#45890, "RE: A/F Gauge - Where do I Tap it into?" In response to Reply # 5 Mar-30-03 04:34 PM by 97eclipseRS
or you can just wire the const 12v to the fuse box at your feet. i think* that the bottom left-most unused(no fuse) location is the 12v const w/ ignition. just stick a wire in w/ a spare fuse... much easier