#45638, "RE: best injectors for 8-10 lbs?" In response to Reply # 0
are u planning on going bigger in the future like 15-20psi later?
if so id say the 30#ers would be a decent choice,
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
#45647, "RE: best injectors for 8-10 lbs?" In response to Reply # 2
Hey dude where have you been? Haven't seen you in awhile here or on the streets. Been to The Pike lately? How that motor you were building? Hit me up with an email sometime.
As for your question, a few guys use the 30# with the SMFU. I am not sure what the diff. is with the regular fmu. And as for the S-AFC, with the whole timing advance and knock I would think about using it. Perhaps the tuning by boost mod would be better if you do it that way. I still use the stock injectors and that has worked fine for me till now at 8psi and the HRC supplied FPR with Walboro pump. I run a little rich but it gets the job done.
#45752, "RE: best injectors for 8-10 lbs?" In response to Reply # 4
i think the 8:1 disk would be good. you should definitely buy the recalibration kit with all the disks in it though so you could upgrade in the future... its only about $10 more than buying the one disk.
-Joe ___________________________________ White 98 Eclipse GS MT Star Stage 2 *Stolen - 10/24/03*
#45818, "RE: best injectors for 8-10 lbs?" In response to Reply # 1
>are u planning on going bigger in the future like 15-20psi >later? > >if so id say the 30#ers would be a decent choice, > > 13 - 14psi is about the max for 30lb injectors. If you are gonna run 8 stock is fine but for easier tuning and lower Fuel pressures 30 lbs will be fine. If you are looking for 15 or more psi, look in to 42lb injectors.
Search
Printer-friendly copy
1 User in Chat
