is the right part for the adapter for our cars http://www.vortechsuperchargers.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=VEOS&Product_Code=6X100-002&Category_Code=FC

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

g, i think you can just use some 6AN to hose barb fittings.

- Dan

HRC Stage 2|30lb injectors|S-FMU|Walbro255HP|AFX UDP|B&M Short Shifter w/ Symborski Shift Kit|Rear Strut Bar|Power Slot Rotors|more...

eh? you mean for the fuel lines?

____________________________________________________
four nails four corners four riders and four horses

what that adapter kit does is it makes the -6AN fittings that come on the SFMU into a female 1/4 npt thread which you can thread the -4AN fitting on. you can use the -6AN fittings to hose barb couplers. i say do not waste your money on the adapter kit from vortech. just go buy 2 of the -6an to 3/8inch hose barb fittings from your local speed shop.

lates
james

Rest In Peace Heidi Doggy

why does it look like there are more fitting than the two you are talking about...

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

Ditto on what Jamesman says, its exactly what i did..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)