What ratio does my votech fmu needa be if im boostin 8psi with stock injectors? Help please

do ~50-55 at idle and 125 under boost. when boosting keep an eye on your fuel pressure, a/f and egt. If you dont have all of those gagues i suggest you install them all before you start to tune your fuel system. and rember its always better to run rich and slowly lean it out to a good median. running lean under boost can almost instantly destroy your motor. check out corbins write up on fuel injectors here http://www.2gnt.com/www/corbin/chooseinj.html .

____________________________________________________
four nails four corners four riders and four horses

i think he's asking about ratio which would be 8:1 disc

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

You might consider getting the FMU disk assortment from Vortech. P/N 6Z270-010. That way you could start at 12:1 like the Star kit and work your way down until you find one you like.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

>You might consider getting the FMU disk assortment from
>Vortech. P/N 6Z270-010. That way you could start at 12:1
>like the Star kit and work your way down until you find one
>you like.


What he said. Start high and go down. To be safe U probably wont end up going below 10:1.

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com